Cable Sleeve, black, 5m PET Perfect cable management with a convenient pulling aid Perfect organization and protection from wear and tear Pulling aid - cable management possible within one minute Individually cut to measure Flexible cable management Suitable for all types of cables

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

FO splice box, 1U, equipped, 24x LC DX, OM4 incl. splice cassette, colored pigtails, couplers

4K Wireless HDMI Extender Set, 30 m HDMI - HDMI Wirelessly transmits HDMI video and audio signals in UHD 4K/30Hz over a distance of up to 30 m with an unobstructed view Wireless HDMI signal transmission up to 30 m (unobstructed view) Point-to-point connection - 1x transmitter (source) + 1x receiver (output device) Supports resolutions of up to 4K UHD (2160p/30Hz) Easy operation and handling thanks to Plug & Play - Just plug in and get started, no driver or software required Power supply via USB-C connection AES 128 bit encryption WPA2 protocol HDMI 2.0/1.4 HDCP 2.2/1.4

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

HDMI AOC Connection Cable, Type A M/M, 10.0m, Ultra HD, 8K@60 Hz, gold, bl Transfer of uncompressed video and audio signals in 8K / 60Hz (UHD-2) resolution with 48 Gbps bandwidth. Active fiber optic data transfer of up to 48 Gbps - zero frame delay Resolutions of up to 8K@60Hz Transfers uncompressed HDMI video and audio signals over a distance of 10 m Flexible installation with a tight bending radius of 20 mm Compact cable with small diameter (OD 4.8 mm) Immune to electromagnetic interference (EMI) Supports HDR (High Dynamic Range) Supports HDCP 2.2 / EDID / CEC / ARC Hybrid construction with fiber optic and copper cores Loss-free data transfer rate at high transmission speed

IEEE 1394b PCIexpress Add-On card 3-port, 2x9-Pin Extern+1x9-Pin Intern, XIO2213B Extend your system by additional Firewire ports! 3x FireWire 800 (1394b) ports: 2x 9-pin extern + 1x 9-pin intern Data transfer rates of 100, 200, 400, and 800Mbps Built-in 4-pin power connector, provides extra power when connected to the system power supply (recommended)

The DA-71156 USB hard disk enclosure offers a versatile and powerful storage solution for both NVMe and SATA SSDs. With support for M.2 modules in 2230, 2242, 2260 and 2280 formats and a maximum storage capacity of up to 8 TB, it is compatible with a wide range of SSDs. The data transfer rate is 10 Gbps for NVMe and 6 Gbps for SATA, while the USB 3.1 Gen2 interface is backwards compatible with USB 3.1, 3.0, 2.0 and 1.1. The tool-free design allows for easy installation and the robust JMS581DL chipset ensures reliable and efficient performance. An integrated LED indicator makes it easy to monitor SSD status, and the durable Pantone 430C aluminum enclosure provides excellent passive heat dissipation. With compact dimensions of 101x32x10 mm and a weight of only 97 g, the housing is ideal for mobile use. It supports plug-and-play and is powered directly via the USB port. The enclosure is compatible with Windows (11, 10, 8, 7, XP, 2000), macOS, Linux (2.4.x or higher), Google Chrome OS (9.x or higher), Android and iOS and offers comprehensive support for USB-C products.

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

Description FO patch cord, duplex, SC to SC MM OM2 50/125 µ, 3 m Best performance and link quality for your network. FO patch cord, duplex, SC to SC,MM OM2 50/125 µ, 3 m

DisplayPort connection cable, DP M/M, 5.0m, w/interlock, Full HD 1080p, bl Ideal for CAD/CAM, GIS, 3D modeling, real time simulation, and more. Supported Video format: 1080p 60Hz; 3D Supported Audio format: DVD-Audio, SACD, Dolby Digital Plus, TrueHD and dts-HD

5x1 HDMI Switch, 4K/60Hz HDCP 2.2 Extend your TV/monitor with additional HDMI connections – Switch conveniently between the signal sources without replugging Switch conveniently between 5 signal sources via remote control, on the device itself or via automatic recognition. Additional HDMI connections for your output device - 5 signal sources via just 1 HDMI connection/cable on the screen Power supply via Micro USB cable (included) Max. resolution: 4K/60Hz Video bandwidth: 18 Gbps Supports High Dynamic Range (HDR) Supports HDCP 2.2 Supports Consumer Electronic Control (CEC) Supports Deep Color (36-bit) HDMI 2.0

This active DisplayPort AOC Hybrid Fiber Optic Cable is ideally suited for transferring uncompressed video and audio data with high bandwidth over longer distances. The hybrid construction, which uses copper and fiber optic cable, prevents electromagnetic interference. This ensures a loss-free transfer along the entire length of the cable with UHD resolution of up to 8K/60Hz and bandwidths of up to 32.4 Gbps. The use of fiber optic cable keeps the diameter of this active cable very low and gives it a very tight bending radius and low weight. It is ideal for use in homes, meeting rooms, and conference rooms as well as within buildings — and these are just a few of the possible uses. The simple Plug and Play installation is user-friendly; just plug it in and immediately enjoy optimal image quality. It supports numerous standards such as DisplayPort 1.4, HDCP 2.2 and HDR. Some of the many audio features supported are DTS-HD Master Audio and Dolby TrueHD. Cutting edge chip technology makes it possible to transfer the full DisplayPort signal spectrum while also supporting uncompressed CED and EDID with very low latency.

With the DIGITUS® 4-Port KVM Switch, you can operate four 4k-compatible PCs using a single USB keyboard and mouse. By pressing a button or using the remote control included in delivery, you can switch comfortably between the PCs, sparing you the trouble of replugging all cables. Output to a monitor occurs either via the integrated HDMI® or the DisplayPort™ output. You can also switch between the audio signals for the microphone and speaker. In addition, two USB 3.0 ports are included on the front side for use with other peripheral devices like USB sticks or external hard drives on all PCs. If you place the KVM switch in an inaccessible location, you can use the IR receiver and connection cable included in delivery even if the KVM switch itself is not within the range of the remote control. Status LEDs on the front side of the switch show you the current configuration at all times. The slim switch features the added benefits of sturdy metal housing and the option of wall mounting.

Description FO patch cord, duplex, LC to SC MM OM4 50/125 µ, 10 m Future-oriented standards and high-end quality for your network. FO patch cord, duplex, LC to SC,MM OM4 50/125 µ, 10 m

Wireless HDMI KVM Extender Set 200 m, Full HD Wirelessly transmits HDMI video and audio signals in Full HD over a distance of up to 200 m with an unobstructed view and offers KVM functionality Wireless HDMI signal transmission up to 200 m (with unobstructed view) Point-to-point connection - 1x transmitter (source) + 1x receiver (output device) Supports transmissions resolutions up to Full HD (1080p / 60 Hz) KVM functionality for connection to mouse and keyboard Touch Screen Back Control - Supports touch screen panels (via USB connection on the receiver) Supports input signals with up to 4K/60Hz HDMI loop-out for connection of a local monitor to the transmitter unit Auto-pairing function - No configuration required AES 128 bit encryption WPA2 protocol

1U Aluminum PDU, rackmount.,7x safety + 1x outlet 16A, 4000W, 250VAC 50/60Hz, overload protection Safe and professional power supply in the 482.6 mm (19") range Perfect power source for your 482.6 mm (19") enclosure Safety due to double-earthed safety plug Sockets are rotated by 45° for optimum space management and easy access Integrated overload protection ensures maximum safety

This HD video and digital audio adapter/converter is ideally suited for connecting a notebook or computer with DP interface to an HDMI monitor, projector, LCD/TFT monitor, LED or plasma TV using an HDMI cable. A secure hold is ensured by the integrated latch on the DP connection. Just plug in and get started with Plug and Play. The gold-plated contacts ensure optimal HD signal transmission and increase the service life of the plugs. DisplayPort Adapter Cable, Type DP-HDMI A M/F, 0.15m,w/interlock, Full HD, DP 1.1a, bl This HD video and digital audio adapter/converter is ideally suited for connecting notebooks or computers with DP interface to an HDMI monitor, projector, LCD/TFT monitor, LED or plasma TV using an HDMI cable. DisplayPort connection with latch offers a secure connection to the end device. A simple solution for adding an external monitor Gold-plated contacts for improved signal transmission Supports video resolutions up to 1080p with 60 Hz Plug and Play

1U cable management panel with 30x400 mm brush 480x120 mm cable fixing tray, black (RAL 9005) Easy installation Brush strip and cable tray for perfect cable management

With the Wireless Presentation System, you can wirelessly transmit HDMI video and audio signals in Full HD over a distance of up to 50 m with an unobstructed view. Operation and installation are super simple. Real Plug & Play - Just plug in and get started. With additional transmitters (DS-55320), the set can be extended to up to 16 transmitter units (total). Switch to the desired transmitter quickly and easily at the press of a button in order to reproduce your content. You can also share content directly from your mobile device (smartphone/table) using your device’s OS directly, no additional app required. Transmitter can be supplied with power via your device’s HDMI connection (> 500 mAh required). To have a safe and stable operation, we recommend to use always the Micro USB cables for power supply of TX and RX. Thanks to the compact design of the transmitter and receiver, installation is easy, quick and can be customized - the perfect solution for meeting and conference rooms.

This Full HD and 3D suitable cable used for connection of audio/video devices, such as Blu-ray player, game pads or consoles, etc., for example, with a TV, monitor or computer. Also capable for use of any IP-based application.

TV-Cart for screens up to 70", max. 50kg wheelbase, VESA max. 600x400 For flexible presentations in a meetingroom or education use Mount a TV between 37" up to 70" With lower shelf for DVD Player or Laptops With upper shelf for Webcams With weehlbase for flexible positioning

This digital HD video and audio cable is ideally suited for connecting a MacBook®, MacBook Air®, MacBook Pro®, iMac®, Mac mini® and Mac Pro® to a DP monitor or projector, LCD-TFT monitor using a DisplayPort cable. The DIGITUS® cable is compatible with DisplayPort version 1.2 and supports resolutions of up to UHD 4 K/60 Hz.

This active DisplayPort AOC Hybrid Fiber Optic Cable is ideally suited for transferring uncompressed video and audio data with high bandwidth over longer distances. The hybrid construction, which uses copper and fiber optic cable, prevents electromagnetic interference. This ensures a loss-free transfer along the entire length of the cable with UHD resolution of up to 8K/60Hz and bandwidths of up to 32.4 Gbps. The use of fiber optic cable keeps the diameter of this active cable very low and gives it a very tight bending radius and low weight. It is ideal for use in homes, meeting rooms, and conference rooms as well as within buildings — and these are just a few of the possible uses. The simple Plug and Play installation is user-friendly; just plug it in and immediately enjoy optimal image quality. It supports numerous standards such as DisplayPort 1.4, HDCP 2.2 and HDR. Some of the many audio features supported are DTS-HD Master Audio and Dolby TrueHD. Cutting edge chip technology makes it possible to transfer the full DisplayPort signal spectrum while also supporting uncompressed CED and EDID with very low latency.

FO splice box, 1U, quick lock, empty without front panel, M20/M25 Cable gland, grey Future-oriented standards and high-end quality for your network. Quick lock system Carrier housing made of 1.0 mm steel sheet, varnished Holder for splice cassettes Extendible base chassis with pigtail fixing punch outs M20/M25 cable entries

Gigabit Multimode to Singlemode Media Converter SFP to SFP, 155Mbps, 1.25Gbps, 850nm to 1550nm The perfect converter solution for optical data transmission Easy conversion between multimode and singlemode fiber optic Fast migration for long distances

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbit/s), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

DisplayPort Adapter Cable, Type DP-DVI (24+1) M/M, 2.0m, w/interlock, DP 1.1a, bl Full HD resolution of up to 1080p Support up to 1080p with 60Hz Perfect for video streams, gaming or extending the workplace Copper wire, foil and braid shielding for robustness and reliable connection Plug and play, no additional driver needed

USB Slot Bracket cable, 2x type A-2x5pin IDC F/F, 0.25m, USB 2.0 compatibel, be Allows a reliable and fast connection of external USB devices with the PC, also about longer distances.

This power cord, also known as „Euro 8 cable“, used for the connection of home entertain devices such as radio, cassette recorder to the indoor power supply system (outlet).

The DIGITUS® Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 A specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6A, because of the transparent yellow colored connector.

The Digitus Cat 6A U/UTP installation cable is designed for use in the structured data center and the building cabling according to ISO/IEC 11801, DIN EN 50288-11-1, DIN EN 50173, IEC 60332-1. The cable is perfectly suitable for the transmission of both analog and digital data and also supports POE and POE+. CAT 6A U-UTP installation cable, 500 MHz Eca (EN 50575), AWG 23/1, 500 m drum, sx, blue Future-oriented standards and high-end quality for your network. 10GBit Ethernet 500 MHz transmission frequency PoE Power over Ethernet support CPR class Eca

1U Alu PDU,rackmount.,9x CEE 7/7 outlet,1x outlet 10A Plug, 250VAC 50/60Hz, IEC C14 plug, pre-fuse Safe and professional power supply in the 482.6 mm (19") range Perfect power source for your 482.6 mm (19") enclosure Sockets are rotated by 45° for optimum space management and easy access

NVMe Clone station USB3.1 Gen2 type-C NVMe M.2 SSD enclosure Manage 2 M.2 NVMe SSDs using a USB-C™ connection - also clone M.2 SSDs offline by pressing a button 2 x M.2 Slots for NVMe SSDs, each up to 4 TB Offline clone function by pressing a button (possible without PC) High data transfer rate of up to 10 Gbps LED indicators show copying progress Can be used as a storage medium for up to 8 TB in total Supported formats: 2242, 2260, 2280 & 22110 / M-Key, B & M-Key SSDs (NVMe) USB-C™ connection: USB 3.2 Gen2 Ideal storage extension for notebooks, PCs, gaming consoles, TVs, NAS or routers (USB-C™) Plug and Play, no driver installation required

USB 3.0 Hub 4-Port, Slimline with USB-C Adapter, 5Gbps, 0,2m cable Expands your notebook with USB-C or USB A connection with 4 additional USB super-speed ports. Additionally 4x USB A 3.0 with up to 5Gbps to a USB A or USB-C port USB-C 3.0 and USB A 3.0 HUB, the combination of USB-A and USB-C is designed in order that the HUB is compatible with a wide range of notebooks. The USB hub provides up to four additional connection options for external hard drives, SSDs or other USB devices on your PC, notebook or tablet. Thanks to the Super-Speed ​​USB 3.0 standard, fast data transfer rates of up to 5 Gbps are possible - USB 2.0 & USB 1.1 are also supported thanks to its backward compatibility. The integrated USB-C connection makes it possible to provide the USB HUB with additional power (Charging cable/adapter not included) Compatible with many operating systems e.g. macOS, Windows and Google Chrome OS

10G SFP+ DAC Cable 0.5m, AWG 30 Allnet,CISCO,Dell,D-Link,Edimax,Etherwan,Fortinet Extend your copper connections SFP+ 10G 0.5m DAC cable AWG 30 Twinax cable 1.0625-10.52Gbps supported data rate

This pre-assembled breakout fiberglass cable is perfect for installations that require an extremely robust and reliable fiberglass design where maximum mechanical protection is necessary. It offers a secure Plug & Play solution for installations with the pre-assembled plug. Easy installation on partially equipped patch panels, for example. The measurement report included in delivery eliminates the need for laborious follow-up inspection.

8K@30Hz. USB Type C to DP, adapter cable HBR3, Aluminum Housing, Black 1m The DIGITUS® USB Type-C to DisplayPort Adapter Cable supports transmission from USB Type-C sources to DP-capable displays. USB Type C to DisplayPort Bi-directional Adapter Cable Supports transmission from USB Type-C interface to DisplayPort interface Supports transfer from DisplayPort interface to USB Type C interface Supports DP Alt-Mode Supports DisplayPort 1.4 version and is backwards-compatible (DP 1.3/1.2/1.1) Supports resolutions of up to 8K (7680x4320) with a display refresh rate of up to 30Hz. Avoid adapters with a Plug and Play cable adapter that does not require external power supply Type-C™ plug can be used on both sides

The L-Support Slide Rails help you to support the installation of heavy duty components in DIGITUS® 483 mm (19”) network- or server cabinets. They are getting fixed on the four 483 mm (19”) profile rails. With galvanized steel sheet and a load capacity of up to 100 kg, they offer a perfect solution.

FO splice box, 1U, equipped, 12x LC DX, OM4 incl. splice cassette, colored pigtails, couplers.  

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

HDMI Ultra High Speed Connection Cable, Type A M/M, 1.0m, w/Ethernet, Ultra HD, 8K@60Hz, gold, bl This cable already meets the requirements of future high-definition devices (TV, beamer, monitor) of the next generation, with higher resolutions, higher data rates and higher frame refresh rates. This cable is ideal for home cinema and gaming applications due to the support of High Dynamic Ranger (HDR) and Dolby True HD. This Ultra High Speed HDMI cable features 2 gold-plated HDMI (male) connectors and durable high quality construction to provide a dependable HDMI connection. This high quality HDMI cable fully supports up to 8K resolutions at 60Hz refresh rate and 4K resolutions at up to 120Hz refresh rate, with life-like color. This powerful HDMI cable supports all HDMI Ultra High Speed (Version 2.1) functions such as ARC, CEC, HEC, Lip Sync, 3D in 4K, Dolby True HD, Multi Stream A/V, 21:9 format and 32 channel audio.

CAT 5e U-UTP patch cord, PVC AWG 26/7, length 0.25 m, grey Future-oriented standards and high-end quality for your network. Transparent blue colored plug for easy identification of Category 5e (100 MHz)

USB-C Silicone charging cable, USB-A - USB-C 1m, USB 2.0, 60W, black Fast charging and synchronization with the high-quality and soft silicone connection cable Soft and high-quality silicone gel material for durability and flexibility. Up to 25 times more durable than standard cables. Hardly any tangles or kinks: The cable remains tangle-free even after frequent bending, twisting and kinking, giving you stress-free use. Outstanding durability: With an estimated service life of up to 25,000 bends, our cable is extremely hard-wearing and remains reliable even with intensive use. Includes cable tie/cable loop for neat and tidy storage.

DisplayPort Adapter Cable, Type DP-DVI (24+1) M/M, 3.0m, w/interlock, DP 1.1a, bl Full HD resolution of up to 1080p Support up to 1080p with 60Hz Perfect for video streams, gaming or extending the workplace Copper wire, foil and braid shielding for robustness and reliable connection Plug and play, no additional driver needed

Cable tester, network, RJ45, BNC main device, remote unit, PoE tester, with case Future-oriented standards and high-end quality for your network. Check network cables quickly and easily Loop test, remote test, PoE test includes adapter for BNC cable tests Read results easily via LED indicators Automatic or manual test possible with hard shell case

4K HDMI 2.0 Extender Set, UHD 4K/60 Hz 70 m via CAT6 or higher Extends the maximum length for HDMI cables to up to 70 m using only a single network cable between a transmitter and a receiver unit Extends 4K/60Hz video content up to 70 m Supports Ultra HD (60Hz), 4096 x 2160p resolution PoC (Power over Cable) - only one unit requires an external power supply unit Integrated IR interface - simple control of the input source with a remote control Supports CAT 6 or higher network cables Supports HDCP 2.2

FO splice box, 1U, equipped, 24x LC DX, OS2 incl. splice cassette, colored pigtails, couplers

DisplayPort Adapter Cable, Type DP - HDMI A M/F, 0.2m, w/lock, HDMI 2.0, act., gold, bl HDMI 2.0 feature support Support DP++ Dual-Mode 4K Ultra HD resolution for best entertainmen Supports 4 lanes at both with data rates up to 2.7 Gbps Supports resolutions up to 4096 x 2160 Deep Color 24bit Built in automatic receiver equalization

Ultra Slim HDMI Splitter, 1x2, 4K/60Hz HDR, HDCP 2.2, 18 Gbps, Micro USB powered Splits one HDMI signal on two displays - supports UHD 4K / 60 Hz with HDR Resolutions of up to 4K / 60 Hz (4:4:4) Full 18 Gbps - for a crystal clear display of UHD contents Supports HDR & HDCP 2.2 Power supply via Micro USB (charging adapter, TV, notebook) Cascading of up to 8 splitters in a row Ultra slim design Compatible with the latest Ultra High Definition (UHD) standards Protection from Electrostatic Discharges (ESD) Plug and Play

4x1 HDMI Switch, 8K/60Hz (4:4:4), Toslink, Stereo, EDID Control Expand your TV/monitor with additional HDMI connections - Convenient switching between signal sources without having to reconnect & additional audio extractor: Toslink / stereo (3.5 mm) for separate playback of the audio signal Convenient switching between 4 signal sources via remote control, on the device itself or via automatic detection Audio extractor: Toslink / stereo (3.5 mm) - decoupling and separate playback of the audio signal EDID switch / management Max. Resolution: 8K/60Hz (4:4:4) Video bandwidth: 48 Gbps Supports High Dynamic Range (HDR) Supports HDCP 2.3 Supports CEC (Consumer Electronics Control) Supports Deep Color (36 bit) HDMI 2.1