This practical USB adapter cable provides a quick and easy way to connect a mouse, keyboard, USB-stick, etc. to the micro USB port every smart phone or tablet or other device with OTG support. The cable converts the USB micro-B port of your phone or tablet into a standard female USB A port, thus allowing you to connect portable HDD’s, memory sticks, mice, keyboards and other peripherals. And also allows to add external power supply via extra connector.
USB-C Adapter | 2 monitors | 2x HDMI | 4K | 0.15m | Aluminium
USB-C to HDMI Dual Monitor MST Hub to extend or clone your desktop to 2 HDMI monitors via MST (Multi-Stream Transport)
Max. resolution single monitor: 4096 x 2160 (4K) @ 60Hz, Max. resolution dual monitor: 4K @ 30Hz
MST: Multi Stream Transport
Input: USB-C male - output: 2x HDMI female
Plug and play: USB-C port with DisplayPort Alternate Mode (DP Alt Mode) is needed
Solid aluminium design
Connect the AC7012 USB-C to HDMI Dual Monitor MST Hub to your laptop with USB-C to clone or extend your desktop to 2 HDMI monitors. The hub supports MST (Multi-stream Transport) that enables the desktop extension to two HDMI monitors. Attach a single monitor with 4K @ 60Hz resolution or two monitors with a maximum resolution of 1080p @ 60Hz to the AC7012. This solid aluminium hub is USB powered, no external power supply is needed. Please make sure the USB-C port of your notebook supports DP Alt Mode.
Ideal for laptop, tablet and most USB-C powered web devices to access wired network.
Fastest USB 3.0 and Gigabit solution ensure high-speed transfer rate up to 1000 Mbps.
Plug and Play in Windows 10, Mac OS X (10.9 and later), Chrome OS and Linux OS.
Foldable and Portable design ideally suits your Ultrabook.
Supports USB 2.0
The cable extends the distance of a USB 2.0 device by 10 m
Meets USB 2.0 specifications and works with low-speed, high-speed and full-speed devices
Hot-pluggable
Cable length: 10 m
This adapter by Delock with EASY-USB male can be plugged into the USB-A female port in both directions. You can expand your existing USB-A plug with this adapter. Thus the male port can be used both-sided and make the plug in easily. Additional the USB female port will be angled left or right in case the existing USB female port is difficult to access.
This USB 2.0 to serial RS-422/485 converter by Delock offers an RS-422/485 connection for measuring devices, POS systems, printers, modems, IoT devices etc. The galvanic isolation prevents data transmission errors with uneven earthing potentials, ground loops or voltage spikes. The converter is suitable for DIN rail mounting.
The DIGITUS® USB Type A to USB-C™ adapter allows you to use your current USB Type-C™ devices on an older USB A port. The adapter supports the USB 3.0 specification with data transfers of up to 5Gbps and provides a maximum power of 15 W (3 A). By simply flipping the USB-C™ connector, you can switch between USB 3.0 and USB 2.0 speeds if supported by the USB A connector. The integrated 56k pull-up resistor protects your devices from damage due to overload and supplies only as much power as the connected USB-C™ device needs. With this adapter you can use the full range of previous USB versions, backward compatible to the USB 2.0 / 1.1 standards.
Allows extending USB cables up to 30 m
Works with CAT6 or CAT5E LAN cables
No software or drivers required
No extra power supply required
GET MORE FROM YOUR PC
Extend the range of your USB products
Uses LAN cables for the extension
Easy installation
If you want to extend a USB cable over more than 2 meters, it is better to use an active extension cable, because an active extension cable boosts the signal and therefore minimizes signal loss. This extension set uses LAN cables to extend your USB cable. This way it is possible to extend your USB cable up to 30 meters.
Αυτό το πρακτικό καλώδιο προσαρμογέα USB, παρέχει έναν γρήγορο και εύκολο τρόπο για τη σύνδεση ενός ποντικιού, πληκτρολογίου, USB stick, κλπ. στη θύρα micro USB κάθε έξυπνου τηλεφώνου ή tablet ή άλλης συσκευής με υποστήριξη OTG. Το καλώδιο μετατρέπει τη θύρα USB micro-B του τηλεφώνου ή του tablet σας σε μια τυπική θηλυκή θύρα USB A, επιτρέποντας έτσι τη σύνδεση φορητών μονάδων σκληρού δίσκου, μνημών, ποντικιών, πληκτρολογίων και άλλων περιφερειακών συσκευών.