The VALUE Junction box is used to repair or extend unshielded Cat.6a cables With this box all 4 or 8 wired installation cables with AWG24 and with an outside diameter from 4mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/TIA 568A or 568B can be easily installed

Οι διαχωριστές Ethernet επιτρέπουν στους χρήστες να περάσουν ένα καλώδιο αντί για δύο μέσα από τοίχους, δάπεδα και οροφές. Αλλά στα δωμάτια στα οποία βρίσκεται ο εξοπλισμός, οι χρήστες θα χρειαστούν ακόμα δύο καλώδια. Για να λειτουργήσουν, οι διαχωριστές ethernet πρέπει να χρησιμοποιούνται σε ζεύγη.

For the use with two 10/100 LAN connections over one (full wired) 8-wire cable Connection cable (17 cm) with RJ-45 plug; adapter with two RJ-45 jacks Pin assignment of connectors: pairs 1, 2 and 3, 6 Wiring scheme on the adapter For Cat. 5e installations Note: The adapters can be used only pairwise

The DIGITUS® Junction Box CAT 7 serves as a tool for connecting of shielded data cables. Use the Junction Box for an extension of your cabling or to replace broken cables by re-connecting without installing a whole new segment. For an easy and fast installation, the cable connector uses the established LSA technique with 45° tilt of the contacts.

For the use with two 10/100 LAN connections over one (full wired) 8-wire cable Connection cable (17 cm) with RJ-45 plug; adapter with two RJ-45 jacks Pin assignment of connectors: pairs 1, 2 and 3, 6 Wiring scheme on the adapter For Cat. 5e installations Note: The adapters can be used only pairwise

The ROLINE Junction box is used to repair or extend unshielded Cat.6 cables With this box all 4 or 8 wired installation cables with AWG24 and with an outside diameter from 4mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/TIA 568A or 568B can be easily installed

The VALUE Junction box is used to repair or extend shielded Cat. 6a cables With this box all 4 or 8 wired installation cables with AWG24 and with an outside diameter from 6.2mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/TIA 568A or 568B can be easily installed With the use of the STP type junction box, it's safe against electrical and magnetical interferences

The ROLINE Junction box is used to repair unshielded Cat. 5e cables With this box all 4 or 8 wired installation cables with AWG24 and with a cover from 4mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/ TIA or 568B can be easily installed

Field Termination Coupler CAT 6A, 500 MHz for AWG 22-26, fully shielded, keyst. design, 26x35x80

Enables related Omada and Festa wall plate APs to be installed directly on bare walls, bringing lower pre-deployment costs and complexity* Ideal for installations without a reserved junction box, incompatible box sizes, or where network cables are not pre-installed in the wall Dimensions: 5.6 × 3.3 × 1.6 in