Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire.

Allowing a maximum video resolution of up to 1920 x 1080 @60Hz! HDMI Ethernet Channel - Adds high-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled devices without a separate ethernet cable Audio Return Channel - Allows an HDMI-connected TV with a built-in tuner to send audio data "upstream" to a surround audio system, eliminating the need for a separate audio cable 3D - Defines input/output protocols for major 3D video formats, paving the way for true 3D gaming and 3D home theater applications Additional Color Spaces - Adds support for additional color models used in digital photography and computer graphics Video resolution: 1920 x 1080

USB 2.0 High Speed Cable with USB type A male to USB 2.0 Type A. Data transfer rate of up to 480Mbit/s. Type: A-A Length: 1.8 m Colour: white

24-port CAT. 6A patch panel for use in 19" network environments with up to 10 Gigabit Ethernet. The VALUE Cat. 6A 19" patch panels fulfil the Cat. 6A/Class EA permanent link standard and are ideal for 10 Gigabit Ethernet networks Cable assembly takes place using LSA plus piercing terminals with colour coding on the top in accordance with EIA/TIA 568A Sheet steel Colour: black

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire.

19" front panel with one height unit (1U) and 40x60mm cable passage, painted in RAL 9005 (black)

DisplayPort to HDTV cable for transferring content from your graphics card (DisplayPort) to your TV (HDTV) - with a quality of up to 1920x1080 @60Hz, incl. audio transmission! HDTV is the standard for digital video transmission in the TV/multimedia sector for e. g.: Connection of a TV set with HDMI interface to a playback device with DisplayPort connection. Cable with one DisplayPort and one HDTV plug. DisplayPort is signal compatible with HDMI. Note: A DisplayPort HDTV cable can only be used in one direction: the DisplayPort connector can only be used on the data source side (e.g. graphics card).

High quality HDMI cable with resolutions up to 10K (10240 x 4320) at 30Hz! Supports a resolution of up to 10240x4320 pixels at a refresh rate of up to 30Hz! Maximum resolutions: 10K (10240x4320) @30Hz; 8K (7680x4320) @60Hz; 5K (5120x2880) @120Hz; 4K (3840x2160) @240Hz Dynamic HDR for particularly rich colours Display Stream Compression (DSC) 1.2 at particularly high resolutions on from 8K Variable refresh rate (VRR), to eliminate delays and jerky images Supports 3D video output Gold-plated contacts for secure data transmission

Space saving and solid mounting of a monitor on walls Easy to mount with sliding bracket design (2 pieces) - one piece has to be fixed to the wall, the other one has to be screwed with VESA on the monitor Slim design, just 15mm from the wall Monitor has to be mount from the upside into the wall mount Meets with VESA 75 (75 x 75 mm) or VESA 100 (100 x 100 mm) Load capacity: 25 kg

The Dual LCD Arm makes your workstation more efficient and you gain more workspace. Designed for two monitors The two aluminium arms are easy to adjust for swinging into any position Each display can be tilted to any angle you need The height of the LCD monitors is for both monitors separately adjustable Load capacity: up to 5 kg each monitor Meets VESA 75 (75 x 75 mm) or VESA 100 (100 x 100 mm) Arm length: up to 2x 350 mm With a C-clamp for desk mount

Area of application: home theater and hi-fi systems (connection between DVD players or game consoles equipped with a Dolby Digital / dts decoder) Digital signal transmission of audio signals via optical fiber Plug Type: M / M

Dual-arm full-motion wall mount for TVs (LED, LCD flat panel TVs) up to 177,8cm (37'' - 70'') Max. weight: 50kg This mount extends out 510mm from wall and allows TVs to turn 60° left or right Full motion allows maximum flexibility - tilts and swivel your TV for easy viewing from any seat in a room Post-installation level adjustment allows the TV to "roll" up to 3° clockwise and counterclockwise to ensure it's perfect level Integrated cable management system keeps cables organized and protected Wide wall plate fits for 406/450mm stud installation

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Halogen-free, flame retardant, low smoke. For a structured halogen-free cabling system we recommend to use the following components: ROLINE Cat.6 UTP Cable, Solid Wire, LSOH, 300 m: 21.15.1789 VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394 VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey) VALUE Cat.6 UTP Patch Cord, grey, LSOH: 21.99.0205

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Prepared cable with unshielded RJ-45 plug on both ends (without coding) incl. kink protection. Connection cable for structured building cabling. Impedance: 100 Ohm. Contact settings 1:1 in accordance with EIA / TIA 568, 8 lines. Construction: internal line 8 wires

A new major feature of USB 3.0 / USB 3.2 Gen 1 is SuperSpeed bus, which increases the maximum transfer rate to 5.0 Gbit/s. USB 3.0 / USB 3.2 Gen 1 receptacles are partly compatible with USB 2.0 device plugs for the respective physical form factors. The cables can be used with PCs with the actual Type A interface. The new USB 3.0 / USB 3.2 Gen 1 Type B connectors are not downwards compatible. For the connection of external USB 3.0 / USB 3.2 Gen 1 peripheral devices as e.g. HDD enclosures, cameras, mobile phones

Prepared cable with unshielded RJ-45 plug on both ends Extra flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires Plug with gold plated contacts Colour: black

Type: A-A, M-F Length: 1.8m Colour: white

Cable routing for server or data cabinet environments Suitable for mounting on all 19" data racks and server racks so cables can be neatly laid - important for greater reliability of connections throughout the cabinet Bristled cable routing provides perfect storage for your network cables and helps ensure a neat 19-inch cabinet, vertically or horizontally Makes the installation cleaner and more professional Quality metal plate

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

The VALUE IP power strip provides the on/off-switching of electrical devices over a TCP/IP network. Easily connect the VALUE IP power strip to a power supply system and the network. After allocating a free IP address, every single port can be independantly switched with every common webbrowser.

Mounting rack for installation in 19-inch cabinets and wall-mounted enclosures 19" fixed shelf with maximum load capacity of 10 kg (25 kg with angled brackets) Suitable for cabinets and wall-mounted enclosures from 600 mm depth Angle brackets included

19" PDU with 8x German Type sockets and supply cable (1.8m) with German Type plug, 1U, for installation in 19" cabinets. 19" socket strip (1 U) for installation in 19" cabinets, incl. mounting bracket 8 German Type sockets (CEE 7/3) Arrangement of sockets: 45° Anodised aluminium profile Cable type: 1.8m H05VV-F 3G 1.5mm², black Maximum load/power: 16A 4000W Colour: ALU / black RAL 9005 Width: 440mm

For connecting devices with USB Type C plug to a USB type A connection! USB interface adapter with one USB type A plug and one USB type C socket For connecting devices with USB Type C plug to an existing PC/laptop with USB 3.1 Gen 1 Type A connection Complies with USB 3.1 standard (transmission up to 5 Gbit/s) Max. Power consumption 5V @ 1000mA Colour: black NOTE: This dongle supports both USB data and load functions, but does NOT support USB Type C DisplayPort Alternate Mode for video devices. Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Halogen-free, flame retardant, low smoke. For a structured halogen-free cabling system we recommend to use the following components: ROLINE Cat.6 UTP Cable, Solid Wire, LSOH, 300 m: 21.15.1789 VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394 VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey) VALUE Cat.6 UTP Patch Cord, grey, LSOH: 21.99.0205

19" FO panel for splitting multicore FO cables to single cores 19" FO panel to split multi-core fiber optic cable on single cores Prepared for splice trays 1.0 mm sheet steel, black Cable entry: PG 13"

OM4 fiber for existing 1 and 10 Gbit/s applications as well as future 40 and 100 Gbit/s systems. Allows extended reach upwards of 550 meters at 10 Gbit/s for ultra long building backbones and medium length campus backbones. With an laser bandwidth of 4700 MHz-km (more than double the IEEE requirement for 10 Gbit/s 300 meter support), the OM4 fiber is also especially well suited for shorter reach in data centers and high performance computing applications. VALUE OM4 Fibre Optic Jumper cable with fiber type 50/125 µm Supplied as duplex cables with 50/125 phases. Color: violet Available lengths: 0.5m, 1m, 2m, 3m, 5m, 7m, 10m, 15m and 20m

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Prepared double shielded twisted pair (PiMF) Category 6A cable with RJ-45 connectors on both sides. Durable thanks to the moulded kink protection Suitable for PoE applications or as a TP extension cable in the multimedia area Pin assignment: 1:1 according to EIA / TIA568, 8 wires Construction: 8 cores solid copper wire. Paired shielding: aluminum-laminated polyester film. Overall shield: copper braid High quality gold plated contacts Halogene Free, Flame retardant, Low Smoke

USB 3.0 / USB 3.2 Gen 1 Cables A new major feature of USB 3.0 / USB 3.2 Gen 1 is SuperSpeed bus, which increases the maximum transfer rate to 5.0 Gbit/s. USB 3.0 / USB 3.2 Gen 1 receptacles are compatible with USB 2.0 device plugs for the respective physical form factors. The cables can be used with PCs with the actual Type A F. Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Mounting rack for installation in 19-inch cabinets and wall-mounted enclosures 19" fixed shelf with maximum load capacity of 10 kg Suitable for cabinets and wall-mounted enclosures from 400 mm depth

Essential piece of equipment for server or data cabinets environments Suitable for mounting on all 19" data cabinets and server racks, allowing cables to be neatly routed for a higher reliability of connections throughout the cabinet or rack The cable rings create an ideal bend radius for the networking cables and greatly assists keeping the rack neat, they can be used vertically or horizontally Designed to give extra support for patch leads and prevents obscurring other equipment and to prevent cable strain Makes installation neater and more professional Cables slide in and out comfortable with out falling out by themselves 1UH quality metal bar 5 cable rings (hooks) for great cable management