DisplayPort to HDTV cable for transferring content from your graphics card (DisplayPort) to your TV (HDTV) - with a quality of up to 1920x1080 @60Hz, incl. audio transmission! HDTV is the standard for digital video transmission in the TV/multimedia sector for e. g.: Connection of a TV set with HDMI interface to a playback device with DisplayPort connection. Cable with one DisplayPort and one HDTV plug. DisplayPort is signal compatible with HDMI. Note: A DisplayPort HDTV cable can only be used in one direction: the DisplayPort connector can only be used on the data source side (e.g. graphics card).

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

DIN Rail Adapter, empty for 2x Keystones Stainless Steel DIN-Rail Adapter for Keystone, coupler For carrying Keystone modules For example, an 8-pole e.g. ROLINE Cat. 6A Keystone 26.11.0353/.0358/.0366... REMARK: Delivery without Keystone Modules

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Keystone with two USB-C sockets. Ideal solution for simple connection of peripheral devices through a panel, floor tank or a consolidation point. Keystone with two USB 3.0 / USB 3.2 Gen 1 sockets Ideal for home offices, conference rooms, panel use, but also for floor tanks and industrial environments For use with USB cables Maximum data transfer rates of up to 5 Gbps Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

Mounting rack for installation in 19-inch cabinets and wall-mounted enclosures 19" fixed shelf with maximum load capacity of 10 kg Suitable for cabinets and wall-mounted enclosures from 500 mm depth

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m); VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392; VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey); VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

This type of connector (C15) is specifically designed for higher temperature devices. Voltage 250 V AC Current: 10 A Connector type: - Male Plug IEC60320 C14 - Female Plug IEC60320 C15 Cable construction: 3 wires Conductors / Wires: Gauge 1.0mm² Material: PVC Color: Black

Bracket for 19-inch components for mounting under the tabletop or on the wall 3U bracket for 19 inch components max. load capacity: 10 kg Appropriate holes in the base plate allow the mount to be mounted under a tabletop as well as on the wall

Bracket for 19-inch components for mounting under the tabletop or on the wall 1U bracket for 19 inch components max. load capacity: 10 kg Appropriate holes in the base plate allow the mount to be mounted under a tabletop as well as on the wall

Cost-effective VALUE patch panels for use in Fast Ethernet and Gigabit Ethernet networks The panels comply with the EIA/TIA 568A The cable connection on the back is implemented via LSA-plus connection technology with colour coding on the top in accordance with EIA/TIA 568 24 ports Colour: light grey

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

OM4 fiber for existing 1 and 10 Gbit/s applications as well as future 40 and 100 Gbit/s systems. Allows extended reach upwards of 550 meters at 10 Gbit/s for ultra long building backbones and medium length campus backbones. With an laser bandwidth of 4700 MHz-km (more than double the IEEE requirement for 10 Gbit/s 300 meter support), the OM4 fiber is also especially well suited for shorter reach in data centers and high performance computing applications. VALUE OM4 Fibre Optic Jumper cable LC/SC with fiber type 50/125 µm Color: violet Available lengths: 0.5m 1m 2m 3m, 5m and 10m

The low-cost solution for Cat.6A cabling for data rates up to 10Gbit/s! Cat.6A/Class EA Keystone jack for installation in a Keystone blank 19" patch panel module frame. Toolless mounting - without using a LSA tool: cable wires are simply placed into the guides of Keystone module, the module is closed and compressed - the connection is ready for use Cat.6A Keystone Jack (Module) UTP Unshielded housing Contacts gold plated Slim type With plastic internal shutter black 180 degree cable entry Support PoE per IEEE 802.3af, PoE+ per IEEE 802.3at For cable AWG 22-24(0.45-0.65mm) For cable OD: 5.0-8.5mm Color code on the Keystone jacks based on the standard EIA/TIA 568 A & B Dimensions (L x W x H): 37.9× 15.8 × 22.2mm

Light weight, compact, cost-effective stripper, simple to operate. Adjustable stripping blade for different insulation thickness, prevents damage of shielding and conductors For stripping coaxial cables RG59, RG6, RG7/11 For stripping round networking cables For stripping flat 4P/6P/8P telephone cables The cassette can be reversed to change different coaxial cables For cutting cables Weight: ca. 70 g

You want to connect your Plasma or LCD TV with HDMI interface to your DVI graphic card while using a HDMI cable? Then you need our HDMI-DVI-Adapter! For connecting a HDMI cable to a DVI interface Adapter with 24+1 DVI Male (DVI-D) and HDMI Female

DVI is the standard for the digital transmission between Graphic card and digital monitor (e. g. TFT) Advantage: No quality loss during digital-/analog-conversion For the 38 cm monitors we recommend the "single link" version, for TFTs > 38 cm "dual link" cables

Connect your Macbook, Ultrabook, Notebook/Laptop or PC with USB Type C connector to a DisplayPort monitor or projector with DP - with a maximum resolution of 3840x2160 @60Hz! USB 3.1 Type C to DisplayPort cable for Macbook, Ultrabook, Notebook/Laptop or PC This adapter allows you to mirror or extend the display of your device to any DisplayPort enabled monitor or projector Portable design No power adapter required Connectors: DisplayPort Female and Type C Male Cable length: 1 m DisplayPort Version 1.2 allows increased resolutions, higher refresh rates, and greater color depth Compliant DP v1.2 (max. 4096 x 2560 @60Hz)

Digital signal transmission of audio signals via optical fiber Area of application: home theater and hi-fi systems (connection between DVD players or game consoles equipped with a Dolby Digital / DTS decoder) Plug Type: M / M

19" blind plate coated in black to cover not required HU 19" blind with two height units (2HE) Paint finish, black For use in 19" server cabinets to conceal unneeded installation spaces

Shielded in metal housing The coupler is able to extend Cat.6 cables Best transmission characteristics for pair combination 1/2 and 3/6 (as used by all ethernet versions) 8 contacts, 1:1 connected

Pre-assembled shielded category 6A patch cable with RJ-45 connectors on both sides. Extra-flat network cable for use in confined spaces. - Hard-wearing thanks to moulded bend protection - Suitable as a patch cable in patch panels or as a device connection cable and intended for use in LANs - Suitable for use in 10 Gigabit Ethernet networks - Contact assignment: 1:1 in accordance with EIA/TIA568, 8 cores - Structure: 8 cores Stranded wire. Pair shielding: Aluminised foil - Gold-plated contacts

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Halogen-free, flame retardant, low smoke. For a structured halogen-free cabling system we recommend to use the following components: ROLINE Cat.6 UTP Cable, Solid Wire, LSOH, 300 m: 21.15.1789 VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394 VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey) VALUE Cat.6 UTP Patch Cord, grey, LSOH: 21.99.0205

19" blind plate coated in RAL 9005 (black) to cover not required HU Front ventilation panel designed for use with 19" rack units / cabinets The panel provides more efficient ventilation to the entire rack system Covers unused rack space with vertical ventialtion slots Height: 1U Length: 483mm (19”) Material: Steel Color: black (RAL 9005)

Tool for cage nuts, suitable for M5 and M6 - for fast and easy working in the server cabinet! Indispensable tool for technicians/engineers wanting to insert or extract cage nuts Avoids cut fingers with sharp tools and screwdrivers Suitable for hole variants of the M5 /M6 cage nuts Easy insertion of the cage nut by placing it into the jaws of the tool, which then squeezes the sides of the cage nut to allow the legs to be easily inserted into the hole Easy and reliable assembly Reduces a possible damage to panel Reduces risk of injury

VALUE HDMI to DVI cable for connecting an ultrabook, notebook/laptop or PC to a monitor, TV or projector - for screen transmissions in excellent quality with a resolution of up to 1920x1080 @60Hz! HDMI is a universal connection standard for the transmission of video and audio signals. Applications include mainly the connection of monitors and televisions to computers, BluRay players and similar devices. The connector requires less space and is therefore more suitable for portable display devices (ultrabooks, notebooks/laptops) or for 2 connectors on a graphics card (on a slot plate). High-quality, double-shielded cable (foil+braid) with gold-plated contacts for optimum transmission of image signals Connectors: DVI-D (18+1) to HDMI