The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

With our UHD (3840x2160 @60Hz) bi-directional DisplayPort cable you can connect up to 20m between your devices. The active cable does not require a separate power supply. Total length of the end device distance (e.g. from notebook/laptop to beamer or PC to monitor): 20 meters Hardware solution, no software required A signal repeater is built into the connectors. The practical plug design prevents the cable from slipping out of the DisplayPort socket. Bidirectional: the cable can be used independently of the plug-in direction. Compliant DP v1.2 (max. 4096 x 2560 @60Hz)

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

19" Cable Entry with brush seal and cable support plate - for cable routing between the front and rear of the rack. Cable entry for server or network cabinets Opening with brush Allows cables to be neatly routed between the rear and front of the rack - important for greater reliability of connections throughout the cabinet. The rear shelf with cable fixings enables optimal cable management in your 19" network or server cabinet. High-quality metal plate

Total length of the end device distance (e.g. from notebook/laptop to beamer or PC to monitor): 15 meters Hardware solution, no software required A signal repeater is built into the connectors. The practical plug design prevents the cable from slipping out of the DisplayPort socket. Bidirectional: the cable can be used independently of the plug-in direction. Compliant DP v1.2 (max. 4096 x 2560 @60Hz)

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

For wall mounting TV screens with VESA adapter. Quick and simple installation Meets VESA 75x75, 100x100, 100x200, 200x100 and 200x200 Detachable VESA Plate Wall mount fixing Material: Steel Colour: Black Fits screen sizes: 33 - 109 cm (13"-43") Load capacity: up to 20 kg Max. arm length: 19.8 cm Tilt range: +5° ~ -15° Swivel Range: +60° ~ -60° Screen Rotation: +5° ~ -90°

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Digital signal transmission of audio signals via optical fiber Area of application: home theater and hi-fi systems (connection between DVD players or game consoles equipped with a Dolby Digital / dts decoder) Plug Type: M / M

Power strip with safety shutter sockets 6-way power strip with plastic housing Sockets are 45° rotated With illuminated 2-pole rocker switch Colour: white

Flexible and coloured rings for cable marking of round cables with an outer diameter of 5 to 6.5 mm Colored marking rings, for marking e.g. network cables with an outer diameter of 5 -6.5mm 10 x 10 pieces (various colors) Cable identification with numbers from 0 to 9 for marking and differentiation Marking solution for cabling in industry, construction and trade Can be used for cable ducts and cable bundles Cable marking clips can also be used after cable installation Small pins and sockets allow the clips to be connected to each other Package unit 10 x 10 connectors

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

Cable with two 9-pole D-Sub connectors, assembled Connects e.g. the serial IBM AT interface with a switchbox All lines connected 1:1 Screen line connected with the foil screen and both connectors

With our UHD (3840x2160 @60Hz) capable HDMI fiber cable you have the possibility to establish a connection of up to 15m between your devices. The active cable (AOC) does not require a separate power supply and is particularly well suited for routing in a cable duct. Total length of the terminal distance (e.g., from notebook / laptop to beamer or PC to monitor): 15 meters Hardware solution, no software required No external power supply required Low plug dimensions Maximum resolution of up to 3840x2160 @60Hz

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

OM4 fiber for existing 1 and 10 Gbit/s applications as well as future 40 and 100 Gbit/s systems. Allows extended reach upwards of 550 meters at 10 Gbit/s for ultra long building backbones and medium length campus backbones. With an laser bandwidth of 4700 MHz-km (more than double the IEEE requirement for 10 Gbit/s 300 meter support), the OM4 fiber is also especially well suited for shorter reach in data centers and high performance computing applications. VALUE OM4 Fibre Optic Jumper cable with fiber type 50/125 µm Color: purple

8-wire RJ45 Cat.8 (Class I) field connector plug for an easy, fast and reliable assembly without special tools. Full shielded with zinc alloy housing T568A & T568B wiring Cat. 8 channel performance verified Solid: 1/22AWG(0.65MM)-1/26AWG(0.4MM) Stranded: 7/22AWG-7/26AWG For cables with outer diameters of 5.0 to 8.5mm Suitable for PoE+ (IEEE 802.3at) applications Easy, quick and reliable installation, no special tool required The ring ensures 360° forwarding of the shielding of the cable to the shielding of the plug For a Cat.8 channel link S/FTP Cabling we recommend to use the following components: 21.99.1800 VALUE S/FTP Cable, Cat.8, Solid Wire, AWG22 21.99.1807 VALUE Cat.8 RJ45 Keystone, Jack, toolless 21.99.1804 VALUE Cat.8 Shielded Field Connector RJ45 plug 21.99.1801 to 21.99.1803 VALUE S/FTP Patch Cable Stranded Cat.8, grey (1m to 3m)

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

OM4 fiber for existing 1 and 10 Gbit/s applications as well as future 40 and 100 Gbit/s systems. Allows extended reach upwards of 550 meters at 10 Gbit/s for ultra long building backbones and medium length campus backbones. With an laser bandwidth of 4700 MHz-km (more than double the IEEE requirement for 10 Gbit/s 300 meter support), the OM4 fiber is also especially well suited for shorter reach in data centers and high performance computing applications. VALUE OM4 Fibre Optic Jumper cable with fiber type 50/125 µm Supplied as duplex cables with 50/125 phases. Color: violet Available lengths: 0.5m, 1m, 2m, 3m, 5m, 7m, 10m, 15m and 20m

With our UHD (7680x4320 @60Hz) capable HDMI fiber cable you have the possibility to establish a connection of up to 15m between your devices. The active cable (AOC) does not require a separate power supply and is particularly well suited for routing in a cable duct. Total length of the terminal distance (e.g., from notebook / laptop to beamer or PC to monitor): 15 meters Hardware solution, no software required No external power supply required Low plug dimensions Maximum resolution of up to 7680x4320 @60Hz

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

19" 1U Adjustable Shelf for Cabinets with a depth of up to 1000 mm. 19" 1U Adjustable Shelf Width: 440 mm, depth: 700 mm For Cabinets with a depth of up to 1000 mm Maximum load: 50 kg 4 mounting rails and 8 sets of M6 screws, cage nuts and washers included

VALUE Strap tape roll with 10mm width and 25m length for clear cable routing - can be cut to size as required and can therefore be adapted for thin or thick cable strands depending on the application Easy to close and reopen Neutral and without logos for unobtrusive use Ideal for sensitive cables and also for thicker cable harnesses Very low pressure load on the cable bundle and therefore also ideally suited for LWL / fiber optic cables The length of the cable tie can be cut according to requirements 10mm width and 25m length

Extension cable with 3P. German male and female connector, 16A / 230V ~ Cable: H05VV-F 3G1.5 3x 1.5mm² Nominal data: 250 VAC/16 A Colour: black

With our UHD (7680x4320 @60Hz) capable HDMI fiber cable you have the possibility to establish a connection of up to 20m between your devices. The active cable (AOC) does not require a separate power supply and is particularly well suited for routing in a cable duct. Total length of the terminal distance (e.g., from notebook / laptop to beamer or PC to monitor): 20 meters Hardware solution, no software required No external power supply required Low plug dimensions Maximum resolution of up to 7680x4320 @60Hz

KVM Extension over a Cat. 6/6A/7 network cable of up to 70 meters at a resolution of 1080p@60Hz and up to 40 meters at a resolution of 4K@30Hz - perfect for advertising, monitoring systems, home entertainment, conferences, etc.

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

Patch cord for outdoor use, e.g. for connecting an IP camera Patch cords for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Assembled double shielded (PiMF) twisted pair cable made of solid wire in category 6A with shielded RJ-45 connectors on both sides. Suitable for connecting external components (e.g. IP cameras), but also for PoE applications or as TP extension cable in multimedia applications UV - resistant Durable thanks to molded bend protection Contact assignment: 1:1 according to EIA/TIA568, 8 cores Construction: 8 cores solid wire. Pair shielding: aluminum-clad polyester foil. Overall shielding: copper braiding High quality gold plated contacts REMARK: NOT suitable for underground installation / application Important: Not suitable for underground installation. RJ-45 connectors must be protected from the influence of the weather.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

VALUE HDMI to DVI cable for connecting an ultrabook, notebook/laptop or PC to a monitor, TV or projector - for screen transmissions in excellent quality with a resolution of up to 1920x1080 @60Hz! HDMI is a universal connection standard for the transmission of video and audio signals. Applications include mainly the connection of monitors and televisions to computers, BluRay players and similar devices. The connector requires less space and is therefore more suitable for portable display devices (ultrabooks, notebooks/laptops) or for 2 connectors on a graphics card (on a slot plate). High-quality, double-shielded cable (foil+braid) with gold-plated contacts for optimum transmission of image signals Connectors: DVI-D (18+1) to HDMI

Patch cord for outdoor use, e.g. for connecting an IP camera Patch cords for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Assembled double shielded (PiMF) twisted pair cable made of solid wire in category 6A with shielded RJ-45 connectors on both sides. Suitable for connecting external components (e.g. IP cameras), but also for PoE applications or as TP extension cable in multimedia applications UV - resistant Durable thanks to molded bend protection Contact assignment: 1:1 according to EIA/TIA568, 8 cores Construction: 8 cores solid wire. Pair shielding: aluminum-clad polyester foil. Overall shielding: copper braiding High quality gold plated contacts REMARK: NOT suitable for underground installation / application Important: Not suitable for underground installation. RJ-45 connectors must be protected from the influence of the weather.

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Stable and tiltable TV wall mount with just 47mm wall distance - the load capacity is up to 75kg and the mount supports maximum VESA 800x400. For screens from 43 inch to 90 inch (max. VESA 800x400) VESA Compatible: 200x200,300x200,300x300,400x200,400x300,400x400,600x400,800x400 Load capacity up to 75kg Tiltable suspension Tilt range: +4° - -10° Very small wall distance of 47mm Securing against unintentional loosening of the mounting hooks Integrated spirit level

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

VALUE DisplayPort Cable with DP connection on both sides for connecting an Ultrabook, Notebook/Laptop or PC to a monitor, TV or projector - for screen transmissions in excellent quality with resolutions of up to 3840x2160 / 4096x2560 @60Hz!

Connect your graphics card to a monitor with DVI connection via DisplayPort - with a maximum resolution of up to 1920x1080 @60Hz! DVI is the standard for digital video transmission in the computer sector. Display Port is the new standard for digital audio/video transmission in the TV and multimedia sector, e. g. for connecting a monitor with DVI interface to a graphic card with DisplayPort connection. The DisplayPort is signal compatible to DVI. Cable with one DisplayPort connector and one DVI connector

Extends or reduces the installation depth of your 19-inch rack or cabinet by 101.5mm. For mounting on 19” racks Extends or reduces the installation depth of your 19-inch rack or cabinet. Depth extension/reduction of 101.5mm Offers an efficient way to store and organize devices. Prevents cables from overhanging the rack and minimises the impact of cable loads in high-density cabling. Easy to install Robust and durable Material: steel