For clean cable routing under the desk Desktop cable tray organizer Simple design: hides wire and power cords for a clean workspace Manage all cables: enough room for power stripes, network, and computer cabling Easy installation Dimensions: 600 x 114 x 76 mm

Ceiling mount for a monitor/TV up to 42" Load capacity: up to 50 kg Meets VESA 75 x 75, 100 x 100, 100 x 200 ou 200 x 200 mm Arm length: 105 - 156 cm -15° tilt; 360° swivel

High performance video adapter, which streams iPhone/Android multimedia applications to HDMI output (up to 1080p) Mirrors the display and transfer the audio signals from your iPhone or Android to your HDMI Monitor/TV Ideal for multimedia watching Supports:

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The VALUE Junction box is used to repair or extend unshielded Cat.6a cables With this box all 4 or 8 wired installation cables with AWG24 and with an outside diameter from 4mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/TIA 568A or 568B can be easily installed

Rollable PC stand with adjustable width between 119-209 mm. Creates more space on your desk, due to it being under the table Stable metal construction with high tilt-stability Adjustable from 119 - 209 mm PC width More flexible in use 2 locking heavy-duty casters

Only for USB / PS/2 combo keyboards USB keyboard has to be connected to the adapter and the adapter has to be connected to the PS/2 port of the PC Ports: 1x USB Type A F, 1x PS/2 M

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a UTP Cable, Solid Wire, 300 m: 21.99.1681 Flush Mount Wall Jack for Keystones: 25.16.8579 Surface Wall Mount Frame: 25.16.8484 VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366 19" Keystone Patch Panel: 26.11.0358 / 26.11.0359 VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0875

Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications were the extension is working over TP High quality plugs with gold plated contacts Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair solid copper wire, complete braid shielding, pairs shielded with aluminium clad polyester foil

Universal mount style fits most projectors With tilt, rotation and swivel function Adjustable structure offers ±20° pitch, ±15° roll and ±15° yaw for multi-angle viewing Adjustable wall tube - can be extended from 22,5 - 75 cm off the wall Four adjustable support arms allows flexible projector positioning that can fit a wide range of projectors Mounting Range: 180mm - 400mm in diameter Load capacity: 16 kg Integrated cable management keeps cables organized and protected Colour: black

Provides safe and easy access to most Curved TV's features Substantial mount, provides long-lasting use Integrated cable management Monitor can be tilted downward up to 15° Mount your screen neatly to the wall and monitor can be swiveled and rotated Fits most displays: 81cm - 139,7cm (32"-55") Universal VESA: 400 x 400mm Distance to the wall: 515 mm Max loading capacity: 35 kg

The low-cost solution for Cat 6a cabling for data rates up to 10Gbit/s! Cat.6/Class E Keystone jack for installation in a Keystone blank 19" patch panel module frame. Connect the cable to the Keystones on modified LSA connections Toolless mounting - without using a LSA tool: cable wires are simply placed into the guides of Keystone module, the module is closed and compressed - the connection is ready for use Colour code on the Keystone jacks based on the standard EIA/TIA 568 A & B Colour: silver

The tester can check UTP and STP (e.g. Cat.5e, Cat.6/6a...) and coaxial cables It can identify and locate the distance to an open or short circuit Uses TDR (Time Domain Reflectometer) to measure the length and distance to the defective of a cable Identification of wiring and pin assignment LCD backlight display Low battery indication

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Shielded RJ-45 coupler for extending Cat.6 Twisted Pair cables Keystone version 8 contacts, 1:1 connected Metal housing

Power Delivery 20V / 5A Μεταφορά δεδομένων έως και 10Gbps

USB 3.1 Type C to HDMI Cableadapter for Macbook, Ultrabook, Notebook/Laptop or PC Connect your device with USB Type C port to any HDMI display or projector This adapter allows you to mirror or extend the display of your device to any HDMI-enabled TV or display Portable design No power adapter required Connectors: HDMI Female and Type C Male Max. resolution: 3840 x 2160 @60Hz Cable length: ca. 10 cm

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865

Stationary monitor arm as an attachment for 17.03.1177/17.99.1177 or generally for mounting a monitor on the desk with the smallest space requirement! Single Monitor Arm for Sit-Stand Workstation, compatible for 17.03.1177 and 17.99.1177) Sleek design blends into various modern interior designs Easy-grip knobs for quick tilt and lock Cable management Provides extra height adjustment range for flat surface sit-stand workstations Mounting possibilities: desk clamp mounting Max. load capacity: 8kg

The affordable solution for Category 6A cabling for data rates up to 10Gbit / s. Twisted pair connection cable with RJ-45 connectors plugged in on both sides Suitable as a patch cord in patch panels or as a device connection cable Durable with molded kink protection Contact assignment 1: 1 according to EIA / TIA 568, 8 cores Construction: 8 cores wire Impedance: 100 ohms

Ideal TV cart for applications in conference or class rooms, easily suitable for meetings and presentations - with a maximum load capacity of 50kg and VESA 600x400! For TVs with up to 50 kg weight Compatible to VESA 200x200, 300x300, 400x200, 400x400 and 600x400 Max. Screen diagonal: 178 cm Height-adjustable shelf for e.g. a laptop, a conference telephone or a BluRay player Height-adjustable webcam shelf Cable ducts in the vertical beams

Some of the advantages of the new ATA series (SATA technology) are conditional on the use of relatively thin and flexible cables, which simplifies the use in the computer substantially and also brings a clear improvement to the air flow inside the computer housing. Connect your high-speed Serial ATA device (e. g. HDD) to a Serial ATA controller Support data transfer rates of up to 6.0 Gbit/s Compatible with SATA 1.5 Gbit/s (SATA I) and 3.0 Gbit/s (SATA II) 4-pin cable with ground wires Connectors: 2x internal 7-pin SATA with latch on both connectors

Dual-arm full-motion wall mount for TVs (LED, LCD flat panel TVs) up to 228,6 cm (50'' - 90'') Max. weight: 75 kg This mount extends out 635 mm from wall and allows TVs to turn 60° left or right Full motion allows maximum flexibility - tilts and swivel your TV for easy viewing from any seat in a room Post-installation level adjustment allows the TV to "roll" up to 3° clockwise and counterclockwise to ensure it's perfect level Integrated cable management system keeps cables organized and protected

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

KVM 2PORT HDMI/USB ΜΕ ΗΧΟ.ΕΝΣΩΜΑΤΩΜΕΝΑ ΚΑΛΩΔΙΑ

Ideal for applications in conference rooms or class rooms! For an easy mobile use of a large LCD monitor or flat-screen TV For fixing LCDs with screen size: 69 - 152 cm (27" - 60") Load capacity: up to 50 kg Adjustable hight: 110 up to 180 cm TV can be tilted downward up to 15 degrees Platform for e. g. holding a DVD player or notebook (WxD): 498 x 400 mm Cables can go through the tube Four wheels for easy movement whereof two are lockable

Monitor power cable with moulded plugs Connectors: IEC 320-C14 plug to IEC 320-C13 plug Nominal data: 250V AC/10A Colour: black

For the use with two 10/100 LAN connections over one (full wired) 8-wire cable Connection cable (17 cm) with RJ-45 plug; adapter with two RJ-45 jacks Pin assignment of connectors: pairs 1, 2 and 3, 6 Wiring scheme on the adapter For Cat. 5e installations Note: The adapters can be used only pairwise

This type of connector (C15) is specifically designed for higher temperature devices. Voltage 250 V AC Current: 10 A Connector type: - Male Plug IEC60320 C14 - Female Plug IEC60320 C15 Cable construction: 3 wires Conductors / Wires: Gauge 1.0mm² Material: H05RN-F rubber Color: Black

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

19" front panel with one height unit (1HE) and 40x40mm cable duct, painted in RAL 9005 (black) Channel for cable routing of patch cords Enables cable routing in the inner cabinet area through oval openings in the cable routing plate Colour: powder-coated black, manoeuvring channel black

Desktop cable tray organizer Simple design: hides wire and power cords for a clean workspace Manage all cables: enough room for power stripes, network, and computer cabling Easy installation Dimensions: 600 x 114 x 76 mm Material : Steel

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. For a structured cabling system we recommend to use the following components: VALUE Cat.6 UTP Cable, Solid Wire, AWG24, 300 m: 21.99.0995. VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394; VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey); VALUE Cat.6 UTP Patch Cord, grey, 5 m: 21.99.0905. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

Δοκιμή συνέχειας ομοαξονικών καλωδίων με βύσματα BNC και 8-πολικές γραμμές δεδομένων w. τοποθετημένες υποδοχές RJ-45. Η συσκευή αναγνωρίζει τις ανοιχτές και βραχυκυκλωμένες συνδέσεις (σύρμα/σύρμα ή σύρμα/θωράκιση). Μια οθόνη δύο γραμμών (LED) υποδεικνύει διαδοχικά με ποιον ακροδέκτη του βύσματος RJ-45 στο άκρο A του καλωδίου συνδέεται ποιος πείρος στο άκρο του καλωδίου Β και η χειροκίνητη ή αυτόματη προώθηση διακόπτη είναι δυνατή. σε περίπτωση βραχυκυκλώματος ανάβουν περισσότερα από δύο LED ταυτόχρονα. Η συσκευή διαθέτει 2 υποδοχές RJ-45. με το παρεχόμενο Remote Kit μπορούν επίσης να ελεγχθούν τα καλώδια που είναι τοποθετημένα στον τοίχο. Παρέχονται δύο καλώδια προσαρμογέα (BNC/RJ-45) για τη δοκιμή ομοαξονικών καλωδίων. Έλεγχος PoE – το PoE Finder επιτρέπει στον διαχειριστή του newtork να ανακαλύψει εάν ένα καλώδιο δικτύου παρέχεται μέσω PoE. Απλώς συνδέστε το καλώδιο δικτύου που πρέπει να ελεγχθεί. Το LED του ανιχνευτή PoE θα ανάψει εάν το καλώδιο τροφοδοτείται με ρεύμα. Μπαταρία (δεν περιλαμβάνεται στην παράδοση): 1x E-block 9V (6LR61/AM-6).