Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

19" PDU with 7x German Type socket and supply cable (1.8m) with German Type plug, 1U, for installation in 19" cabinets, incl. installation angle. 19" socket strip (1 U) for installation in 19" cabinets, incl. mounting brackets With overload protection 7 German Type sockets (CEE 7/3) Arrangement of sockets: 45°. Anodised aluminium profile Cable type: 1.8m H05VV-F 3G 1.5mm², black Maximum load/power: 16A 4000W Colour: ALU / black RAL 9005 Width: 440mm

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Halogen-free, flame retardant, low smoke. For a structured halogen-free cabling system we recommend to use the following components: ROLINE Cat.6 UTP Cable, Solid Wire, LSOH, 300 m: 21.15.1789 VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394 VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey) VALUE Cat.6 UTP Patch Cord, grey, LSOH: 21.99.0205

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Halogen-free, flame retardant, low smoke. For a structured halogen-free cabling system we recommend to use the following components: ROLINE Cat.6 UTP Cable, Solid Wire, LSOH, 300 m: 21.15.1789 VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394 VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey) VALUE Cat.6 UTP Patch Cord, grey, LSOH: 21.99.0205

19" cable guide with bristles, black metal, for horizontal or vertical cable routing Cable routing for server or data cabinet environments Suitable for mounting on all 19" data racks and server racks so cables can be neatly laid - important for greater reliability of connections throughout the cabinet Bristled cable routing provides perfect storage for your network cables and helps ensure a neat 19-inch cabinet, vertically or horizontally Makes the installation cleaner and more professional Quality metal plate

Type: A-A, M-F Length: 3.0m • Colour: white

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

USB Cable with one Type A and one Micro USB Connector Meets standard USB 2.0 (transfer rate up to 480 Mbps) Colour: white Note: Product similar to picture.

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance:100 Ohm. Cable jacketing: LSOH - Low Smoke Zero Halogen - cable emits limited smoke and no halogens when exposed to high sources of heat. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, LSOH: 21.15.1889. VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, LSOH, grey, 5 m: 21.99.0705. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

Wall mountable monitor arm, for easy and reliable adjustment of a monitor weighing up to 8kg and VESA 75 / 100! This single, height adjustable monitor arm makes your workstation more efficient: you gain more workspace and will be able to adjust the monitor height according to your personal demands - flawlessly and easy. Designed for one monitor Detachable, 360° rotatable VESA plate enables an easy installation and handling The aluminium arm is easy to adjust for swinging into any position The display can be tilted to any angle you need Spring assistant system easily adjusts the height of monitor Load capacity: up to 8kg Meets VESA 75 (75x75mm) or VESA 100 (100x100mm) Arm length: up to 453mm

19" blind plate coated in RAL 9005 (black) to cover not required HU Front ventilation panel designed for use with 19" rack units / cabinets The panel provides more efficient ventilation to the entire rack system Covers unused rack space with vertical ventialtion slots Height: 2U Length: 483mm (19”) Material: Steel Color: black (RAL 9005)

LCD monitor arm with gas spring for easy and reliable adjustment of two monitors weighing up to 6.5kg each and VESA 75/100! Made of high quality aluminum alloy Meets VESA 75 (75x75 mm) or VESA 100 (100x100 mm) Special feature: Pivot function - screen is 90 degrees rotatable Small desktop mount saves space A clever cable management is built into the rear arm

Multimedia connection system: computer, video, audio, control or network connections can be easily integrated with the modular multimedia connection system in switch programs. With the unsightly, lying around or hanging cables is now finally concluded. The system is cost-effective and future-proof as it can be expanded at any time to new interfaces.

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. For a structured cabling system we recommend to use the following components: VALUE Cat.6 UTP Cable, Solid Wire, AWG24, 300 m: 21.99.0995. VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394; VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey); VALUE Cat.6 UTP Patch Cord, grey, 5 m: 21.99.0905. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

A new major feature of USB 3.0 / USB 3.2 Gen 1 is SuperSpeed bus, which increases the maximum transfer rate to 5.0 Gbit/s. USB 3.0 / USB 3.2 Gen 1 receptacles are compatible with USB 2.0 device plugs for the respective physical form factors. The cables can be used with PCs with the actual Type A F. Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

Power cable with safety plug (German type) & C13 cold appliance socket Cable with safety plug (German type) 90° angled and IEC 320-C13 Plugs: Safety plug to C13 plug Nominal data: 250V AC/10A Colour: white

The VALUE Junction box is used to repair or extend shielded Cat. 6a cables With this box all 4 or 8 wired installation cables with AWG24 and with an outside diameter from 6.2mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/TIA 568A or 568B can be easily installed With the use of the STP type junction box, it's safe against electrical and magnetical interferences

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Monitor power cable with moulded plugs Connectors: IEC 320-C14 plug to IEC 320-C13 plug Nominal data: 250V AC/10A Colour: Black

Manual USB 3.0 / USB 3.2 Gen 1 switch to access a USB device from different computers To use a peripheral device such as a printer/scanner on two PCs without using a print server Also suitable for SSDs, USB sticks or other data carriers Supports USB 3.0 / USB 3.2 Gen 1 and therefore data transfer rates of up to 5Gbps The assignment of the PC to the device is done by a switch on the device. No additional power supply required Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m); VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392; VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey); VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

DisplayPort to UHDTV cable for transferring content from your graphics card (DisplayPort) to your TV (UHDTV) - with a quality of up to 3840x2160 @60Hz, incl. audio transmission!

Tidy up your patch panel with these keystone socket covers - protect your patch panel from dust and give it a clean look.

For screen sizes: 36 cm up to 61 cm Weight capacity: up to 8 kg Tiltable: 160° up or down Swiveling (Pivot function): 270° Meets VESA standard VESA 75 (75x75 mm) and VESA 100 (100x100 mm) Material: Cold steel construction Colour: Black

Type: A-B Length: 0.8 m Colour: white

This USB Switch offers the possibility for 2 PCs to share a single USB device such as a printer, scanner or digital camera Access to the USB device manually via button on the switch Supports USB 2.0 Two LEDs indicate the active Port Bus-powered mode

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

HDMI UHD cable for optimal transmission of films, with a resolution of up to 3840x2160 @60Hz! The gold-plated metal plug comes with mechanical resistance to increase the cables tensile strength! HDMI Ethernet Channel - Adds high-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled devices without a separate ethernet cable Audio Return Channel - Allows an HDMI-connected TV with a built-in tuner to send audio data "upstream" to a surround audio system, eliminating the need for a separate audio cable 3D - Defines input/output protocols for major 3D video formats Cable with HDMI male connector on both sides Gold plated contacts for higher durability

Cat.6/Class E Keystone jack for installation in a Keystone blank 19" patch panel module frame. Unshielded construction Colour code on the keystone jacks is based on the standard EIA/TIA 568 A and 568 B Toolless installation Colour: white

Channel for cable routing of patch cords Enables cable routing in the inner cabinet area through oval openings in the cable routing plate Colour: powder-coated RAL 9005 black

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Halogen-free, flame retardant, low smoke. For a structured halogen-free cabling system we recommend to use the following components: ROLINE Cat.6 UTP Cable, Solid Wire, LSOH, 300 m: 21.15.1789 VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394 VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey) VALUE Cat.6 UTP Patch Cord, grey, LSOH: 21.99.0205