Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Cable length: 1 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots

Patch cable for networking connections between devices Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications were the extension is working over TP High quality plugs with gold plated contacts Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair solid copper wire, complete braid shielding, pairs shielded with aluminium clad polyester foil

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Cable length: 5 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Patch cable for networking connections between devices Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications were the extension is working over TP High quality plugs with gold plated contacts Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair solid copper wire, complete braid shielding, pairs shielded with aluminium clad polyester foil

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

Patch cord with foil shielded pairs and braided cable, CAT 6A Gold plated contacts Low Smoke Zero Halogen (LSZH) jacket Molded strain reliefs Snagless boots

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Assembled double shielded (PiMF) twisted pair cable category 6A with shielded RJ-45 connectors on both sides. For outdoor use (cable routing), e.g. for connecting an IP camera. Patch cord for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts UV - resistant (Ultraviolet resistance - ability of the material to withstand the degradation that can be caused by exposure to ultraviolet light) Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil REMARK: NOT suitable for underground installation / application

The pair-shielded Cat.6A RJ45 flat patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The flat patch cable impresses with its flat construction and is with 2.2mm height ideal for laying e.g. behind ledges or under a carpet. The cast grommet captivates with its slim design and thus simplifies the plugging process in confined spaces. Sheath material: PVC Cross section: 4 x 2 x AWG30 / 7 Cable diameter: 7.0x2.2mm Plug type: short plug

Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions. Cross section 4 x 2 x AWG27/7 Length imprint on boot Available in 11 colours

Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Prepared double shielded twisted pair (PiMF) Category 6A cable with RJ-45 connectors on both sides. Durable thanks to the moulded kink protection Suitable for PoE applications or as a TP extension cable in the multimedia area Pin assignment: 1:1 according to EIA / TIA568, 8 wires Construction: 8 cores solid copper wire. Paired shielding: aluminum-laminated polyester film. Overall shield: copper braid High quality gold plated contacts Halogene Free, Flame retardant, Low Smoke

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions. Cross section 4 x 2 x AWG27/7 Length imprint on boot Available in 11 colours

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil. 100% Component Level testing

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

Pre-assembled shielded category 6A patch cable with RJ-45 connectors on both sides. Extra-flat network cable for use in confined spaces. - Hard-wearing thanks to moulded bend protection - Suitable as a patch cable in patch panels or as a device connection cable and intended for use in LANs - Suitable for use in 10 Gigabit Ethernet networks - Contact assignment: 1:1 in accordance with EIA/TIA568, 8 cores - Structure: 8 cores Stranded wire. Pair shielding: Aluminised foil - Gold-plated contacts

RJ45 patch cable Cat.6A S/FTP PVC UL The Cat.6A (TIA) patch cable enables 10Gbit Ethernet as a transmission standard and has gold-plated contacts. • Cat.6A (TIA) • S/FTP cable with AWG24/7