The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.
For a structured shielded Cat.6a cabling system we recommend to use the following components:
VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881.
Flush Mount Wall Jack for Keystones: 25.16.8579.
Surface Wall Mount Frame: 25.16.8484.
VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366.
19" Keystone Patch Panel: 26.11.0359.
VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.
The DIGITUS® Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 A specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6A, because of the transparent yellow colored connector.
Product information for RJ45 Patch Cord Cat.6A S/FTP LSZH Cat.7 raw cable green 2m
The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions.
Cross section 4 x 2 x AWG26 / 7
Moulded grommet, slim design
Durable thanks to moulded-on kink protection
Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN
Contact assignment: 1:1 according to EIA/TIA568, 8 cores
Structure: 8 cores stranded wire
Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres.
Durable thanks to moulded-on kink protection
Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN
Contact assignment: 1:1 according to EIA/TIA568, 8 cores
Structure: 8 cores stranded wire
Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres.
Durable thanks to moulded-on kink protection
Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN
Contact assignment: 1:1 according to EIA/TIA568, 8 cores
Structure: 8 cores stranded wire
The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz
Patch cable for networking connections between devices
Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends.
Durable due to moulded kink protection.
Flexible cable, suitable for narrow bending.
Impedance: 100 Ohm
Contact settings 1:1, in accordance with the EIA/TIA 568 standard.
Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid
Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres.
Durable thanks to moulded-on kink protection
Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN
Contact assignment: 1:1 according to EIA/TIA568, 8 cores
Structure: 8 cores stranded wire
Patch cable for networking connections between devices.
Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends.
Durable due to moulded kink protection.
Flexible cable, suitable for narrow bending.
High quality plugs with gold plated contacts.
Contact settings 1:1, in accordance with the EIA/TIA 568 standard.
Construction: 4-pair stranded copper wire.
Complete braid shielding. Pairs shielded with aluminium clad polyester foil.
The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions.
Cross section 4 x 2 x AWG27/7
Length imprint on boot
Available in 11 colours
The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz
Patch cable for networking connections between devices
Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends.
Durable due to moulded kink protection.
Flexible cable, suitable for narrow bending.
Impedance: 100 Ohm
Contact settings 1:1, in accordance with the EIA/TIA 568 standard.
Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid
Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres.
Durable thanks to moulded-on kink protection
Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN
Contact assignment: 1:1 according to EIA/TIA568, 8 cores
Structure: 8 cores stranded wire