Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.   100% Component Level testing

Patch cord for outdoor use, e.g. for connecting an IP camera Patch cords for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Assembled double shielded (PiMF) twisted pair cable made of solid wire in category 6A with shielded RJ-45 connectors on both sides. Suitable for connecting external components (e.g. IP cameras), but also for PoE applications or as TP extension cable in multimedia applications UV - resistant Durable thanks to molded bend protection Contact assignment: 1:1 according to EIA/TIA568, 8 cores Construction: 8 cores solid wire. Pair shielding: aluminum-clad polyester foil. Overall shielding: copper braiding High quality gold plated contacts REMARK: NOT suitable for underground installation / application Important: Not suitable for underground installation. RJ-45 connectors must be protected from the influence of the weather.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

The InLine® patch cable Slim, Cat.6A, S/FTP, TPE (LSZH), PoE, sets standards in terms of performance and flexibility. With S/FTP shielding at pair and cable level, it guarantees first-class signal integrity and minimises electromagnetic interference. The TPE (LSZH) sheathing not only makes the cable extremely flexible, but also safe for use in enclosed spaces, as it does not emit any halogen-containing vapours in the event of fire. In combination with its PoE capability, it not only enables the transmission of data, but also the power supply for PoE-capable devices. Perfectly suited for professional use in offices, data centres and other business-critical environments.

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

This Cat.6A (TIA) data cable from the EFB-Elektronik brand transmits data up to 10Gbit. Because it is a Cat.6A (TIA) patch cable, it supports a frequency range up to 500MHz, which provides high data transmission performance.

Cable length: 10 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet. Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Cable length: 1 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Patch cord for outdoor use, e.g. for connecting an IP camera Patch cords for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Assembled double shielded (PiMF) twisted pair cable made of solid wire in category 6A with shielded RJ-45 connectors on both sides. Suitable for connecting external components (e.g. IP cameras), but also for PoE applications or as TP extension cable in multimedia applications UV - resistant Durable thanks to molded bend protection Contact assignment: 1:1 according to EIA/TIA568, 8 cores Construction: 8 cores solid wire. Pair shielding: aluminum-clad polyester foil. Overall shielding: copper braiding High quality gold plated contacts REMARK: NOT suitable for underground installation / application Important: Not suitable for underground installation. RJ-45 connectors must be protected from the influence of the weather.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

The shielded Cat.6A RJ45 patch cable with ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions. Cross section 4 x 2 x AWG27/7 Length imprint on boot Available in 8 colours

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

The InLine® Slim Cat.6A S/FTP patch cable series combines highest network performance with maximum space and energy efficiency. Thanks to the particularly slim design with AWG28 conductors, these cables enable a significantly higher port density in network cabinets and ensure improved air circulation, which increases cooling and efficiency.

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable from our ROLINE Recycled Material product line with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE RECYCLED MATERIAL products consist of more than 50% recycled materials. The packaging is even made from 100% recycled material.

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

CAT 6A S-FTP patch cord, Cu, LSZH AWG 26/7, length 3 m, color blue Future-oriented standards and high-end quality for your network. With LSZH outer casing (Low Smoke Zero Halogen) for the best fire behavior and low smoke emission. Transparent yellow colored plug with metal shielding for easy identification of category 6A (500 Mhz) Inner conductor: Copper (Cu) Supports: PoE, PoE+, PoE++ (IEEE 802.3af; 3at; bt)

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

flat patch cable Shielded U/FTP: In pairs in metal foil (PiMf) meets Cat.6 A requirements up to 500MHz four pairs of nuclei, intertwined solid copper filaments 1: 1 assignment, color code according to EIA/TIA-568B 2x RJ45 plug, vase, with snap protection Blue-colored plug for differentiation Split in TPE without halogens flexible and easy to install in a PE bag that can be closed with EAN code