Prepared cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

Assembled double shielded (PiMF) twisted pair cable category 6A with shielded RJ-45 connectors on both sides. For outdoor use (cable routing), e.g. for connecting an IP camera. Patch cord for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras)   Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts UV - resistant (Ultraviolet resistance - ability of the material to withstand the degradation that can be caused by exposure to ultraviolet light) Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil REMARK: NOT suitable for underground installation / application

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire. 100% Component Level testing

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

Cable length: 7 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Assembled double shielded (PiMF) twisted pair cable category 6A with shielded RJ-45 connectors on both sides. For outdoor use (cable routing), e.g. for connecting an IP camera. Patch cord for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras)   Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts UV - resistant (Ultraviolet resistance - ability of the material to withstand the degradation that can be caused by exposure to ultraviolet light) Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil REMARK: NOT suitable for underground installation / application

Cable length: 5 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

The Cat.6A (TIA) patch cable has gold-plated contacts and meets the requirements for 10Gbit Ethernet.

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire. 100% Component Level testing

Full copper 26AWG wires, 50µ gold RJ-45 contacts. Specifications comply to international standards Cables are 100% tested. 5 Year warranty. ACT patch cables are fitted with full copper conductors and comply with the ANSI/TIA568-C2-1 performance requirements. The combination of a well structured copper data network, reliable active devices and copper patch cables ensure a trouble-free operating network which will be stable for a long period of time. By applying materials that comply with international standards, your active network devices will be able to perform optimally, without failures. For PoE (Power over Ethernet) applications, it is important to use patch cables with full copper conductors. All ACT patch cables have full copper conductors.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Cable length: 1.5 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Category 6a twisted-pair patch cable with shielded RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires in aluminium-laminated foil for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire, pairs shielded with alu-laminated foil

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Assembled double shielded (PiMF) twisted pair cable category 6A with shielded RJ-45 connectors on both sides. For outdoor use (cable routing), e.g. for connecting an IP camera. Patch cord for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts UV - resistant (Ultraviolet resistance - ability of the material to withstand the degradation that can be caused by exposure to ultraviolet light) Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil REMARK: NOT suitable for underground installation / application

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

Assembled double shielded (PiMF) twisted pair cable category 6A with shielded RJ-45 connectors on both sides. For outdoor use (cable routing), e.g. for connecting an IP camera. Patch cord for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras)   Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends Durable due to moulded kink protection Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts UV - resistant (Ultraviolet resistance - ability of the material to withstand the degradation that can be caused by exposure to ultraviolet light) Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil REMARK: NOT suitable for underground installation / application

Cable length: 3 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets