This Cat.6A (TIA) data cable from the EFB-Elektronik brand transmits data up to 10Gbit. Because it is a Cat.6A (TIA) patch cable, it supports a frequency range up to 500MHz, which provides high data transmission performance.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Fiber jumper are well defined components in international standard of structured cabling ISO/IEC11801. Due to many different network protocols created in the last 25 years , also a wide range of connectors had been developed. Some of them are still important today: LC, SC, E2000®, MPO/MTP.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz Patch cable for networking connections between devices Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete shielding in tinned copper braid

The InLine® patch cable Slim, Cat.6A, S/FTP, TPE (LSZH), PoE, sets standards in terms of performance and flexibility. With S/FTP shielding at pair and cable level, it guarantees first-class signal integrity and minimises electromagnetic interference. The TPE (LSZH) sheathing not only makes the cable extremely flexible, but also safe for use in enclosed spaces, as it does not emit any halogen-containing vapours in the event of fire. In combination with its PoE capability, it not only enables the transmission of data, but also the power supply for PoE-capable devices. Perfectly suited for professional use in offices, data centres and other business-critical environments.

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

This Cat.6A (TIA) data cable from the EFB-Elektronik brand supports data transmissions up to 10Gbit. The S/FTP shielding reliably protects against interference and ensures high signal quality. Since it is a Cat.6A (TIA) network cable, it supports a frequency range of up to 500MHz, which enables high data transmission performance. • Increase interference immunity in electromagnetically charged environments – double shielding (S/FTP) improves EMC reserve, reduces susceptibility to radiation and stabilizes transmission in parallel cable routing. • Cover fire protection requirements in compliance with standards – flame-retardant cable behaviour according to IEC60332-1 reduces the spread of fire in the event of a fault and supports compliance with common installation specifications. • Power and connect end devices via one cable – reduces cabling effort because data and power are transmitted via 4PPoE according to IEEE802.3bt on one line (fewer power supplies/sockets, faster installation).  

10G SFP+ connector on both sides Drives 10 Gigabit Ethernet (3m distance)

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

ROLINE Cat. 6A Modular Coupler with shielded metal housing for the connection or extention of RJ-45 network cables. Shielded metal housing to protect the signals against electrical and magnetic interference The coupler is able to extend Cat. 6A cables 8 contacts, 1:1 connected Easy installation Colour: silver Remark: Picture similar

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Fiber optic single mode patch cords are suitable for data and telecommunication applications. Offerings include Simplex and Duplex configurations with variety of different connectors. Patch cords are 100% factory tested and compatible with industry standards EIA/TIA, Telcordia, IEC. These patchcords utilize duplex single-mode fiber, characterized by a core diameter of approximately 9 microns and a cladding diameter of 125 microns. This configuration is particularly well-suited for long-range communications, making it a popular choice for many advanced networking environments. Duplex single-mode fiber optic patchcords are ideal for applications that require high-speed data transmission over long distances. They can support data rates of 1 Gb/s, 10 Gb/s, 40 Gb/s, and even 100 Gb/s over distances that can extend up to 10 kilometers or more, depending on the specific requirements and network equipment used. This high performance makes them suitable for various high-bandwidth applications such as telecommunications, Ethernet, and fiber channel, as well as for connections that require bidirectional communication on separate fibers

Product information for RJ45 Patch Cord Cat.6A S/FTP LSZH Cat.7 raw cable red 0,5m The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions. Cross section 4 x 2 x AWG26 / 7 Moulded grommet, slim design

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.

Fiber optic single mode patch cords are suitable for data and telecommunication applications. Offerings include Simplex and Duplex configurations with variety of different connectors. Patch cords are 100% factory tested and compatible with industry standards EIA/TIA, Telcordia, IEC. These patchcords utilize duplex single-mode fiber, characterized by a core diameter of approximately 9 microns and a cladding diameter of 125 microns. This configuration is particularly well-suited for long-range communications, making it a popular choice for many advanced networking environments. Duplex single-mode fiber optic patchcords are ideal for applications that require high-speed data transmission over long distances. They can support data rates of 1 Gb/s, 10 Gb/s, 40 Gb/s, and even 100 Gb/s over distances that can extend up to 10 kilometers or more, depending on the specific requirements and network equipment used. This high performance makes them suitable for various high-bandwidth applications such as telecommunications, Ethernet, and fiber channel, as well as for connections that require bidirectional communication on separate fibers

Cable length: 7 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends for networking connections between devices. Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. STANDARD QUALITY FOR BEST PRICE!

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Full copper conductors and comply with the ANSI/TIA-568-C2 performance requirements. Specifications comply to international standards

Single Mode Simplex Configuration High Precision ceramic ferrule with excellent concentricity 100% Inspection for optical properties and fiber end face finish LSZH Sheath

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire. Halogen-free, flame retardant, low smoke. 100 % Component level testing