The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

The pair-shielded Cat.6A RJ45 flat patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The flat patch cable impresses with its flat construction and is with 2.2mm height ideal for laying e.g. behind ledges or under a carpet. The cast grommet captivates with its slim design and thus simplifies the plugging process in confined spaces. Sheath material: PVC Cross section: 4 x 2 x AWG30 / 7 Cable diameter: 7.0x2.2mm Plug type: short plug

The shielded Cat.6A RJ45 patch cable with ensures excellent performance for 10 Gigabit Ethernet applications. The moulded grommet captivates with its slim design and thus simplifies the insertion process in cramped conditions. Cross section 4 x 2 x AWG27/7 Length imprint on boot Available in 8 colours

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding.

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.   100% Component Level testing

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Cable length: 3 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 10 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet. Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.

Τα καλώδια της Goobay κατασκευάζονται από ποιοτικά υλικά, με τις υψηλότερες τεχνικές προδιαγραφές, προσφέροντας αξιόπιστη λειτουργία υψηλής απόδοσης, με αντοχή στον χρόνο.

Καλώδιο οπτικής ίνας της TP-LINK με μήκος 1m σε μαύρο χρώμα. Μεταδίδει δεδομένα με μεγαλύτερη ταχύτητα από ένα απλό καλώδιο χαλκού, είναι πιο λεπτό και δεν επηρεάζεται από ηλεκτρομαγνητικές παρεμβολές, χάνοντας ελάχιστο από το σήμα του σε μεγάλες αποστάσεις. Τύπος: Οπτική ίνα Μήκος: 1m

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.   100% Component Level testing

Patch cord for outdoor use, e.g. for connecting an IP camera Patch cords for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Assembled double shielded (PiMF) twisted pair cable made of solid wire in category 6A with shielded RJ-45 connectors on both sides. Suitable for connecting external components (e.g. IP cameras), but also for PoE applications or as TP extension cable in multimedia applications UV - resistant Durable thanks to molded bend protection Contact assignment: 1:1 according to EIA/TIA568, 8 cores Construction: 8 cores solid wire. Pair shielding: aluminum-clad polyester foil. Overall shielding: copper braiding High quality gold plated contacts REMARK: NOT suitable for underground installation / application Important: Not suitable for underground installation. RJ-45 connectors must be protected from the influence of the weather.

Patch cord for outdoor use, e.g. for connecting an IP camera Patch cords for networking connections between devices in combination with outdoor application (e.g. connection to outdoor surveillance cameras) Assembled double shielded (PiMF) twisted pair cable made of solid wire in category 6A with shielded RJ-45 connectors on both sides. Suitable for connecting external components (e.g. IP cameras), but also for PoE applications or as TP extension cable in multimedia applications UV - resistant Durable thanks to molded bend protection Contact assignment: 1:1 according to EIA/TIA568, 8 cores Construction: 8 cores solid wire. Pair shielding: aluminum-clad polyester foil. Overall shielding: copper braiding High quality gold plated contacts REMARK: NOT suitable for underground installation / application Important: Not suitable for underground installation. RJ-45 connectors must be protected from the influence of the weather.

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Product information for Duplex Patchcable LC-SC/APC OS2 G652D 50m LSZH 2mm yellow Fiber jumper are well defined components in international standard of structured cabling ISO/IEC11801. Due to many different network protocols created in the last 25 years , also a wide range of connectors had been developed. Some of them are still important today: LC, SC, E2000®, MPO/MTP. Fiber jumper (patchcord) are defined as shortest connection between passive interface and active deviceport, regarding structured cabling standard. Rating of performance, known as category, as well as performance of total transmission channel, known as link class,Similar descriptions for patchcords: Connection cable, drop cable, adapter cable, interconnecting cord, Jumper

Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends for networking connections between devices. Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. STANDARD QUALITY FOR BEST PRICE!

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

The cheap solution for data transfer rates of up to 10 Gbit/s and a bandwidth of 500 MHz. Patch cable for networking connections between devices. Prepared shielded Twisted Pair cable (PiMF) with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Impedance: 100 Ohm. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 8 lines, pairs shielded with aluminium foil, complete braided shielding. For a structured shielded Cat.6a cabling system we recommend to use the following components: VALUE Cat.6a S/FTP Cable, Solid Wire, 100 m: 21.99.0881. Flush Mount Wall Jack for Keystones: 25.16.8579. Surface Wall Mount Frame: 25.16.8484. VALUE Cat.6a Keystone, RJ-45, shielded: 26.99.0366. 19" Keystone Patch Panel: 26.11.0359. VALUE Cat.6a S/FTP Patch Cord, 5 m: 21.99.0865.

Cable length: 2 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6 U/UTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6 patch cords. The bending radius is lower in comparison with regular patchcords. All this results in a better airflow in the server rack/network cabinet.

Gold-plated contacts for best connection Standards tested PVC cable jacket for flexibility and durability

Prepared flat cable with shielded RJ-45 plug on both ends Durable cables thanks to kink protection Extra flat cable for special applications Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: internal line 8 wires, pairs shielded with aluminium clad foil Plug with gold plated contacts Colour: black

CAT 8.2 S-FTP installation cable,2000 MHz,AWG 22/1 Dca, 100 m, ring, simplex, green Future-oriented standards and high-end quality for your network 40 GBit Ethernet 2000 MHz transmission frequency 4PPoE Power over Ethernet support BauPVO category Dca

Cable length: 1 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable from our ROLINE Recycled Material product line with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE RECYCLED MATERIAL products consist of more than 50% recycled materials. The packaging is even made from 100% recycled material.

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil

RJ45 patch cable Cat.6 U/UTP PVC CCA The Cat.6 patch cable has gold-plated contacts and meets the requirements for 5Gbit Ethernet. Technical product features • Cat.6 • U/UTP cable with AWG24/7 • Jacket material made of polyvinyl chloride (PVC) • Plug connection: RJ45 to RJ45 • Has gold-plated contacts The jacket of the patch cable is made of polyvinyl chloride (PVC ) material and has a length print on the nozzle. In addition, the cable offers the option of power supply via PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt. The assignment of the RJ45 plugs is 1:1 and follows TIA/EIA 568B . Suitable for the extended temperature range -20 - 70 °C. The Ethernet cable has a conductor material made of CCA and is ideal for applications in structured building cabling, industrial Ethernet and data centers. A bandwidth of up to 250 MHz is achieved.

Prepared flat cable with unshielded RJ-45 plug on both ends Flat cable for special applications Durable cables thanks to kink protection Contact settings 1:1 in accordance with EIA/TIA 568, 8 lines Construction: 8 wires, flexible core Plug with gold plated contacts Colour: black Plug with gold plated contacts

S/FTP (PiMF) Cat. 6A LSOH Patch Cord with shielded RJ-45 connectors on both sides. PoE-capable although it is slim, flexible and tangle-free. S/FTP (PiMF) LSOH Cat. 6A Patch Cord For use in 10-Gigabit Ethernet networks, especially for connecting devices (e.g. IP cameras) Slim, flexible and tangle-free Suitable for PoE applications and multimedia applications where the extension is working over TP High quality plugs with gold plated contacts Durable due to moulded kink protection Contact settings 1:1, in accordance with the EIA/TIA 568 standard Construction: 4-pair stranded copper wire, complete braid shielding, pairs shielded with aluminium foil