ROLINE Keystone connector in Cat.6 Quality for use in a Gigabit Ethernet Network The system is composed of a 19" patch panel frame and the UTP Cat.6 RJ-45 keystone jacks Assembling of cables and keystones takes place over LSA-plus or toolless Colour code on the keystone jacks, based on the standard EIA/TIA 568 A and 568 B Colour: Black

Full-featured USB 3.1 / USB 3.2 Gen 2 cable with a data transmission rate of up to 10 Gbit/s and full Power Delivery support of up to 20V 5A! High quality USB 3.1 / USB 3.2 Gen 2 cable with improved shielding With the new reversible Type C connectors at both ends Gold-plated contacts for low wear at high plugging cycles Suitable for data transfer rates of up to 10 Gbit/s Supports USB Power Delivery to 20V / 5A Supports video transfer Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

DVI is the standard for the digital transmission between Graphic card and Digital monitor (e.g. TFT) Advantage: No quality loss during Digital- / Analog- conversion

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire.

DVI is the standard for the digital transmission between Graphic card and Digital monitor (e.g. TFT) Advantage: No quality loss during Digital- / Analog- conversion

1x Punch Down Tool - for inserting wire into insulation-displacement connectors on e.g. punch down blocks, patch panels, keystone modules, surface mount boxes 1x LAN Tester - Line tester for continuity test of Cat.5/6/6A and ISDN network lines - Separate receiver for long length cable, the main unit and separate receiver can be attached to each other via a lateral guide rail - Connection test with LED display for 8 single wires and shielding / detection of continuity, misalignment, interruption, short circuit, crossover cable - Power supply via 9VDC block battery (not supplied) - Compatible with the following connectivity modular plugs: RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C, 6P2C) - Supported network standards: 10Base-T, 10Base-T2, 285A, TIA568A / 568B 1x Cable Stripper - with 4 different blades for cutting the PVC jacket of cables of various sizes 1x RJ45 Crimping Tool

For the connection of external USB 3.0 / USB 3.2 Gen 1 peripheral devices as e. g. HDD enclosures, cameras, mobile phones which have got the new Micro interface. USB 3.0 / USB 3.2 Gen 1 SuperSpeed cables with high quality and improved shielding for data transfer rates of up to 5 Gbit/s Gold plated contacts for enhanced durability Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

ROLINE HDMI to DVI cable for connecting an ultrabook, notebook/laptop or PC to a monitor, TV or projector - for screen transmissions in excellent quality with a resolution of up to 1920x1080 @60Hz! HDMI is a universal connection standard for the transmission of video and audio signals. Applications include mainly the connection of monitors and televisions to computers, BluRay players and similar devices. The connector requires less space and is therefore more suitable for portable display devices (ultrabooks, notebooks/laptops) or for 2 connectors on a graphics card (on a slot plate). High-quality, double-shielded cable (foil+braid) with gold-plated contacts for optimum transmission of image signals Connectors: DVI-D (18+1) to HDMI

Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. High quality plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded copper wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil. 100% Component Level testing

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

Mirror or expand the screen of your device to any monitor or projector/beamer with VGA connection - with a resolution of up to 1920x1080 @60Hz!

Power strip with safety shutter sockets 6-way power strip with plastic housing Sockets are 45° rotated With illuminated 2-pole rocker switch Colour: black

DVI is the standard for the digital transmission between Graphic card and Digital monitor (e.g. TFT) Advantage: No quality loss during Digital- / Analog- conversion For the 38 cm TFT-monitors we recommend the "single link" version, for TFT's > 38 cm "dual link" cables

For connecting devices with USB Type C connection to a USB 3.1 / USB 3.2 Gen 2 Type A connection! USB interface adapter with one USB type A socket and one USB type C plug For connecting devices with a USB A connection to an existing PC/laptop or a mobile device (Tablet/Smartphone) with USB Type C connection. Complies with USB 3.1 / USB 3.2 Gen 1 standard (transmission up to 5 Gbit/s) Max. Power consumption 5V3A Colour: black NOTE: This dongle supports both USB data and charging functions, but does NOT support USB Type C DisplayPort Alternate Mode for video devices. Note: According to the current specifications of USB.org we have adapted the technical data of our USB 3 products. The new designation for the already known USB specifications has been changed to USB 3.2 Gen 1 (formerly USB 3.0 / USB 3.1 Gen 1) and USB 3.2 Gen 2 (formerly USB 3.1 / USB 3.1 Gen 2).

ROLINE 19" blind panel painted in RAL 7035 (light grey) to cover unneeded HE - with snap-in mechanism for quick and easy mounting without cage nuts or other accessories. Suitable for all 19" network or server cabinets For use in 19" cabinets to conceal unneeded levels Quick and easy to install via snap-in mechanism Does not require tools or cage nut fixing screws Snap lock functionality Material: steel 19" blind panel with two height units (2UH) RAL 9005 Lacquer finish, black

Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire

ROLINE DisplayPort Cable with DP connection on both sides for connecting an Ultrabook, Notebook/Laptop or PC to a monitor, TV or projector - for screen transmissions in excellent quality with resolutions of up to 3840x2160 / 4096x2560 @60Hz!