Cable length: 1 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 1 m Connectors: C14 - C19 Maximum load: 230V / 10A

Full copper 26AWG wires, 50µ gold RJ-45 contacts. Specifications comply to international standards Cables are 100% tested. 5 Year warranty. ACT patch cables are fitted with full copper conductors and comply with the ANSI/TIA568-C2-1 performance requirements. The combination of a well structured copper data network, reliable active devices and copper patch cables ensure a trouble-free operating network which will be stable for a long period of time. By applying materials that comply with international standards, your active network devices will be able to perform optimally, without failures. For PoE (Power over Ethernet) applications, it is important to use patch cables with full copper conductors. All ACT patch cables have full copper conductors.

Cable length: 1.5 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Cable length: 3 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 3 m Connectors: Schuko CEE 7/7 male (straight) - C19 IEC 60320 Maximum load: 230V / 16A

Cable length: 1.5 m Connectors: C20 - C21 IEC60320 The C21 connector is high temperature resistant up to 155°C  

Cable length: 3 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 2 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet. Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.

Cable length: 2 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 2 m Connectors: CEE 7/7 male (angled) - C15 Maximum load: 230V / 10A Color: black Suitable for servers, network switches; e.g. HP and Cisco The CEE 7/7 to C15 powercord is often used for powering network switches and servers. The power cord is suitable for heat generating applicances. ACT provides many types of power cables: CEE 7/7, Euro, UK, USA, Italian, Danish, Swiss and Indian/South African cables. ACT supplies powercables with the following connectors: CEE 7/7, IEC60320 C5, C7, C13, C14, C19, C20 and IEC60309 CEE1. ACT offers different types of power split cables and power cables in the following colors: black, white, red, blue, green and yellow.

Adapter | USB-C | HDMI | 4K | 60Hz Video and audio converter from USB-C to HDMI Maximum resolution 4096 x 2160 (4K) @ 60Hz

Cable length: 2 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

A power cable provides power to active equipment. ACT provides many types of power cables: CEE 7/7, Euro, UK, USA, Italian, Danish and Swiss cables. ACT supplies power cables with the following connectors CEE 7/7, IEC60320 C5, C7, C13, C14, C19, C20 and IEC60309 CEE1. In addition, ACT offers different types of power split cables and power cables in the following colors: black, white, red, blue, green and yellow.

Cable length: 0.50 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Cable length: 3 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Cable length: 3 m Connectors: Euro male - C7 female (angled left/right) Maximum load: 230V / 2.5A

Cable length: 10 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

European supplier with 100% quality control and possibility for onsite support Suited for connecting equipment with a 10G fiber port to a multimode cable

Cable length: 3 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 1 m Connectors: Schuko CEE 7/7 male (straight) - C19 IEC 60320 Maximum load: 230V / 16A

Cable length: 10 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet. Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.

Cubic Power Strip with three F-type outlets, two USB-C ports and one USB-A port (max. 30W) for charging tablets and smartphones

Cable length: 3 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 2 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6 U/UTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6 patch cords. The bending radius is lower in comparison with regular patchcords. All this results in a better airflow in the server rack/network cabinet.

Cable length: 2 m Connectors: C20 - C21 IEC60320 The C21 connector is high temperature resistant up to 155°C

Cable length: 10 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet. Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.

Cable length: 1 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 3 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 7 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 1 m Full copper 32AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinets

Full copper 24AWG wires, 50µ gold RJ-45 contacts. Specifications comply to international standards Cables are 100% tested. 5 Year warranty. ACT patch cables are fitted with full copper conductors and comply with the ANSI/TIA568-C2-1 performance requirements. The combination of a well structured copper data network, reliable active devices and copper patch cables ensure a trouble-free operating network which will be stable for a long period of time. By applying materials that comply with international standards, your active network devices will be able to perform optimally, without failures. For PoE (Power over Ethernet) applications, it is important to use patch cables with full copper conductors. All ACT patch cables have full copper conductors. Compatible with CPR Euroclass: Eca

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 3 m Connectors: C13 - C14 Maximum load: 230V / 10A

Cable length: 3 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Mix and match warranty, 4 connection / CP link Full copper 24AWG wires, 50µ gold RJ-45 contacts. Specifications comply to international standards