Category 6A twisted-pair patch cable with RJ-45 connectors on both sides. Particularly thin and flexible cable with individual pairs of wires for use in confined spaces, such as in data centres. Durable thanks to moulded-on kink protection Suitable as patch cable in patch panels or as device connection cable and intended for use in the LAN Contact assignment: 1:1 according to EIA/TIA568, 8 cores Structure: 8 cores stranded wire ROLINE GREEN products are marked only with a paper tag and build with halogen-free TPE material, without plastic bags and without plastic cable straps for use in eco-friendly environments.

Prepared shielded Twisted Pair cable with RJ-45 connectors on both sides. Used as patch cable in wiring cabinet or as direct connection cable between devices. Flexible cable suitable for narrow bending. Contact settings 1:1, according to EIA/TIA 568, 8 wires. Construction: 8 wires stranded copper wire, braided shield. Impedance: 100 Ohm. For a structured cabling system we recommend to use the following components: ROLINE Cat.6 S/FTP Cable, Solid Wire, AWG23: 21.15.0890 (100 m), 21.15.0891 (300 m). VALUE Cat.6 Flush/Surface Mount Wall Jack, shielded, white: 25.99.8492/25.99.8392. VALUE Cat.6 19" Patch Panel, 24 Ports, shielded: 26.99.0353 (black), 26.99.0354 (grey). VALUE Cat.6 S/FTP Patch Cord, grey, 5 m: 21.99.0805. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

Gold-plated contacts for best connection Standards tested PVC cable jacket for flexibility and durability

Mix and match warranty, 4 connection / CP link Full copper 24AWG wires, 50µ gold RJ-45 contacts. Specifications comply to international standards

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

Patch cable for networking connections between devices. Prepared double shielded Twisted Pair cable with screened RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. Complete braid shielding. Pairs shielded with aluminium clad polyester foil.

Cable length: 3 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Cable length: 2 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet Snagless boots For connecting two active devices e.g. a switch and a nas Specifications comply to international standards Cables are 100% tested 5 Year warranty CAT6 U/UTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6 patch cords. The bending radius is lower in comparison with regular patchcords. All this results in a better airflow in the server rack/network cabinet.

Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends for networking connections between devices. Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire. STANDARD QUALITY FOR BEST PRICE!

Full copper 24AWG wires, 50µ gold RJ-45 contacts. Specifications comply to international standards Cables are 100% tested. 5 Year warranty. ACT patch cables are fitted with full copper conductors and comply with the ANSI/TIA568-C2-1 performance requirements. The combination of a well structured copper data network, reliable active devices and copper patch cables ensure a trouble-free operating network which will be stable for a long period of time. By applying materials that comply with international standards, your active network devices will be able to perform optimally, without failures. For PoE (Power over Ethernet) applications, it is important to use patch cables with full copper conductors. All ACT patch cables have full copper conductors. Compatible with CPR Euroclass: Eca

Gold-plated contacts for best connection Standards tested PVC cable jacket for flexibility and durability

RJ45 patch cable Cat.6 U/UTP PVC CCA The Cat.6 patch cable has gold-plated contacts and meets the requirements for 5Gbit Ethernet.

RJ45 patch cable Cat.6 U/UTP PVC CCA The Cat.6 patch cable has gold-plated contacts and meets the requirements for 5Gbit Ethernet. Technical product features • Cat.6 • U/UTP cable with AWG24/7 • Jacket material made of polyvinyl chloride (PVC) • Plug connection: RJ45 to RJ45 • Has gold-plated contacts The jacket of the patch cable is made of polyvinyl chloride (PVC ) material and has a length print on the nozzle. In addition, the cable offers the option of power supply via PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt. The assignment of the RJ45 plugs is 1:1 and follows TIA/EIA 568B . Suitable for the extended temperature range -20 - 70 °C. The Ethernet cable has a conductor material made of CCA and is ideal for applications in structured building cabling, industrial Ethernet and data centers. A bandwidth of up to 250 MHz is achieved.

Copper CAT6 stranded unshielded (UTP) patch cord, 8P8C Snagless boots

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet

Gold-plated contacts for best connection Standards tested PVC cable jacket for flexibility and durability

Cable length: 5 m Full copper 28AWG wires, 50µ gold RJ-45 contacts Outer diameter jacket of only 3.8mm to improve air flow in cabinet